Re: Dlink DWL-650 Issues


From: Eric Johanson (ericj_at_cubesearch.com)
Date: 2002-07-01 22:47:46 UTC



The "GetNextTuple: No more items"

Is a classic VCC problem.

You can try setting ignore_cis_vcc=1 in the pcmcia config...

Otherwise, you can try playing with the cis file to have it set the correct voltage for the card - - I don't recall what the dlink card requires, but I DO recall having issues making it work with some pcmcia chipsets that didn't provide the correct voltage. Check which voltage (3.3 or 5) the card requires, and ensure that your chipset supports it.

I had thought that the Dlink card required cardbus; this is not the case, it just needs the correct voltage (Don't trust marketing fluff).

-Eric

PS. I was most unhappy with the dlink performance after I got it working, so I tossed it for a linksys. This was pre- hostap days. :)

On Mon, 1 Jul 2002, Jason Price wrote:

> Hello all:
> trying to get my dlink card to work with hostap driver. I have been banging my head against the wall for about 4 days now. This card is running on a older compaq LTE 5380 , which im able to get my lucent card working with the wavelan drivers. also the DWL-650 works in winbows on the same laptop. so to cont my story.. beat my head against a wall for 3 days trying to get the hostap driver to work with no luck.. so i decided to take the drive out of the compaq LTE 5380 and install it in my dell insprion 7000 ( reinstall the distro ) well low and behold it worked on the first try, but when i swaped the drive back i get the following listed below: I did take some notes while the drive was running on the dell... (index 0x01 irq 9 0x0100-0x013f) irq 9 doesn't look used on the compaq.. Im stumped. if anyone could help me that would be great.
>
> Thanks Jason
>
> CARD DLINK DWL-650
>
> lsmod
> Module Size Used by
> hostap_cs 80368 0 (unused)
> 8390 6032 0 (unused)
>
> cat /etc/pcmcia/config.opts
>
> # System resources available for PCMCIA devices
> #include port 0x0180-0x01bf, port 0x0100-0x013f
> include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
> #include port 0x100-0x4ff, port 0x100-0x13f, port 0x156-0x002, port 0x800-0x8ff, port 0xc00-0xcff
> include memory 0xc0000-0xfffff
> include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
> include irq 9
> include irq 11
> # High port numbers do not always work...
> include port 0x1000-0x17ff
>
> # Extra port range for IBM Token Ring
> #include port 0xa00-0xaf
>
>
>
> cat /proc/interrupts
> CPU0
> 0: 102354 XT-PIC timer
> 1: 137 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 3: 1442 XT-PIC pcnet_cs
> 14: 2162 XT-PIC ide0
> NMI: 0
> ERR: 0
>
>
> Dmesg:
> Symbols match kernel version 2.4.18.
> Linux Kernel Card Services 3.1.22
> options: [pm]
> Intel PCIC probe:
> Cirrus PD672x ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
> host opts [0]: [ring] [65/6/3] [1/15/3]
> host opts [1]: [ring] [65/6/3] [1/15/3]
> ISA irqs (default) = 3,4,5,7,9,10,11,12 polling interval = 1000 ms
> Databook TCIC-2 PCMCIA probe: not found.
> pci_hotplug: PCI Hot Plug PCI Core version: 0.3
> cs: IO port probe 0x0c00-0x0cff: excluding 0xc28-0xc2f
> cs: IO port probe 0x0800-0x08ff: excluding 0x828-0x82f
> cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x320-0x327 0x388-0x38f 0x428-0x42f 0x480-0x48f
> cs: IO port probe 0x1000-0x17ff: excluding 0x1028-0x102f 0x13f0-0x13f7 0x1428-0x142f 0x17f0-0x17f7
> cs: memory probe 0x0d0000-0x0dffff: clean.
> eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:E0:98:04:18:1F
> hostap_cs: hostap_cs.c 0.0.0 2002-05-19 (SSH Communications Security Corp, Jouni Malinen)
> hostap_cs: GetNextTuple: No more items
>
> /var/log/messages:
> cardmgr[36]: socket 1: Intersil PRISM2 11 Mbps Wireless Adapter
> cardmgr[36]: executing: 'modprobe hostap_cs'
> hostap_cs: hostap_cs.c 0.0.0 2002-05-19 (SSH Communications Security Corp, Jouni Malinen)
> hostap_cs: GetNextTuple: No more items
> get dev info on socket 1 failed: Resource temporarily unavailable
>
>
> cardctl ident
> Socket 0:
> product info: "Ethernet", "Adapter", "2.0"
> manfid: 0x0149, 0xc1ab
> function: 6 (network)
> Socket 1:
> product info: "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02", ""
> manfid: 0x0156, 0x0002
> function: 6 (network)
>
> cardmgr -V
> cardmgr version 3.1.34
>



This archive was generated by hypermail 2.1.4.