Dlink DWL-650 Issues

From: Jason Price (wireless_at_inetica.com)
Date: 2002-07-01 22:33:09 UTC

Hello all:
 trying to get my dlink card to work with hostap driver. I have been banging my head against the wall for about 4 days now. This card is running on a older compaq LTE 5380 , which im able to get my lucent card working with the wavelan drivers. also the DWL-650 works in winbows on the same laptop. so to cont my story.. beat my head against a wall for 3 days trying to get the hostap driver to work with no luck.. so i decided to take the drive out of the compaq LTE 5380 and install it in my dell insprion 7000 ( reinstall the distro ) well low and behold it worked on the first try, but when i swaped the drive back i get the following listed below: I did take some notes while the drive was running on the dell... (index 0x01 irq 9 0x0100-0x013f) irq 9 doesn't look used on the compaq.. Im stumped. if anyone could help me that would be great.

Thanks Jason

CARD DLINK DWL-650 lsmod

Module                  Size  Used by
hostap_cs              80368   0  (unused)
8390                    6032   0  (unused)

cat /etc/pcmcia/config.opts

# System resources available for PCMCIA devices
#include port 0x0180-0x01bf, port 0x0100-0x013f
include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
#include port 0x100-0x4ff, port 0x100-0x13f, port 0x156-0x002, port 0x800-0x8ff, port 0xc00-0xcff
include memory 0xc0000-0xfffff
include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff include irq 9
include irq 11
# High port numbers do not always work...
 include port 0x1000-0x17ff

# Extra port range for IBM Token Ring
#include port 0xa00-0xaf

cat /proc/interrupts

  0:     102354          XT-PIC  timer
  1:        137          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  3:       1442          XT-PIC  pcnet_cs
 14:       2162          XT-PIC  ide0
NMI:          0 
ERR:          0

Symbols match kernel version 2.4.18.
Linux Kernel Card Services 3.1.22
options: [pm]
Intel PCIC probe:
Cirrus PD672x ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets host opts [0]: [ring] [65/6/3] [1/15/3]
host opts [1]: [ring] [65/6/3] [1/15/3]
ISA irqs (default) = 3,4,5,7,9,10,11,12 polling interval = 1000 ms Databook TCIC-2 PCMCIA probe: not found. pci_hotplug: PCI Hot Plug PCI Core version: 0.3

cs: IO port probe 0x0c00-0x0cff: excluding 0xc28-0xc2f
cs: IO port probe 0x0800-0x08ff: excluding 0x828-0x82f
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x320-0x327 0x388-0x38f 0x428-0x42f 0x480-0x48f
cs: IO port probe 0x1000-0x17ff: excluding 0x1028-0x102f 0x13f0-0x13f7 0x1428-0x142f 0x17f0-0x17f7
cs: memory probe 0x0d0000-0x0dffff: clean.
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:E0:98:04:18:1F hostap_cs: hostap_cs.c 0.0.0 2002-05-19 (SSH Communications Security Corp, Jouni Malinen) hostap_cs: GetNextTuple: No more items

cardmgr[36]: socket 1: Intersil PRISM2 11 Mbps Wireless Adapter cardmgr[36]: executing: 'modprobe hostap_cs' hostap_cs: hostap_cs.c 0.0.0 2002-05-19 (SSH Communications Security Corp, Jouni Malinen) hostap_cs: GetNextTuple: No more items
get dev info on socket 1 failed: Resource temporarily unavailable

cardctl ident
Socket 0:
  product info: "Ethernet", "Adapter", "2.0"   manfid: 0x0149, 0xc1ab
  function: 6 (network)
Socket 1:
  product info: "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02", ""   manfid: 0x0156, 0x0002
  function: 6 (network)

cardmgr -V
cardmgr version 3.1.34

This archive was generated by hypermail 2.1.4.