Re: Using hostap_cs with prism 2.5 based card


From: Hakan Lennestal (Hakan.Lennestal_at_brfsodrahamn.se)
Date: 2002-06-04 18:45:56 UTC


Hi !

I'm using the prism2 driver in station mode towards a few different Lucent and AirPort AP:s on a daily bases (without wep). No problems at all.

/Håkan

In message <20020604193125.B25917_at_jm.epitest.fi>, Jouni Malinen writes:
> On Mon, Jun 03, 2002 at 01:12:54AM -0500, Brian Capouch wrote:
>
> > I have been unable to use any of the several Prism2 cards I have
> > available to me in conjunction with Lucent cards, GIVEN that the HostAP
> > card is acting as a client and the Lucent card is in the access point.
>
> > This is my third mention of this on this list. Neither of the previous
> > posts elicited so much as a single comment.
>
>
> Well, this is a Host _AP_ driver after all.. Station mode support in the
> driver is not that complete and it is not really a high priority issue
> at least for me. However, I have no problems using Compaq WL100 with Host
> AP driver in station mode with a Lucent AP (WavePOINT-II)..
> This was without WEP; station associated with the AP and got replies to
> ping packets.
>
>
> --
> Jouni Malinen PGP id EFC895FA
>



This archive was generated by hypermail 2.1.4.