Re: Using hostap_cs with prism 2.5 based card

From: Jouni Malinen (
Date: 2002-06-04 16:31:25 UTC

On Mon, Jun 03, 2002 at 01:12:54AM -0500, Brian Capouch wrote:

> I have been unable to use any of the several Prism2 cards I have
> available to me in conjunction with Lucent cards, GIVEN that the HostAP
> card is acting as a client and the Lucent card is in the access point.

> This is my third mention of this on this list. Neither of the previous
> posts elicited so much as a single comment.

Well, this is a Host _AP_ driver after all.. Station mode support in the driver is not that complete and it is not really a high priority issue at least for me. However, I have no problems using Compaq WL100 with Host AP driver in station mode with a Lucent AP (WavePOINT-II).. This was without WEP; station associated with the AP and got replies to ping packets.

Jouni Malinen                                            PGP id EFC895FA

This archive was generated by hypermail 2.1.4.