From: Edson Roberto Schmidt (schmidt_at_netdez.net)
Date: 2002-09-28 17:03:09 UTC
Hi Christian,
Sorry by the delay, but I saw your messages only now.
I´m currently use two senao nl2511cd ext2 plus with 2 ricoh adapters and all seems to work fine.
I´m using the folowing firmware version from senao, the only that work for me.
http://www.senao.com/service%20&%20support/drives/Firmwares/2511cd_frm100.zip
here my syslog report.
Sep 22 18:35:48 netdez_ap_pico pcmcia: Starting PCMCIA services: Sep 22 18:35:48 netdez_ap_pico kernel: Linux PCMCIA Card Services 3.2.1 Sep 22 18:35:48 netdez_ap_pico kernel: kernel build: 2.2.20-2twb #2 Mon Sep 2 22:18:19 BRT 2002 Sep 22 18:35:48 netdez_ap_pico kernel: options: [pci] [cardbus] [apm] Sep 22 18:35:48 netdez_ap_pico kernel: PCI routing table version 1.0 at 0xf2c00 Sep 22 18:35:48 netdez_ap_pico kernel: 00:08.0 -> irq 1 Sep 22 18:35:48 netdez_ap_pico kernel: Intel ISA/PCI/CardBus PCIC probe: Sep 22 18:35:48 netdez_ap_pico kernel: Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:09, mem 0x68000000 Sep 22 18:35:48 netdez_ap_pico kernel: host opts [0]: [pci only] [io 3/6/1] [mem 3/6/1] [pci irq 15] [lat 32/176] [bus 32/34] Sep 22 18:35:48 netdez_ap_pico kernel: PCI card interrupts, PCI status changes Sep 22 18:35:48 netdez_ap_pico kernel: Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:0b, mem 0x68001000 Sep 22 18:35:48 netdez_ap_pico kernel: host opts [0]: [pci only] [io 3/6/1] [mem 3/6/1] [pci irq 10] [lat 32/176] [bus 35/37] Sep 22 18:35:48 netdez_ap_pico kernel: PCI card interrupts, PCI status changes Sep 22 18:35:49 netdez_ap_pico pcmcia: cardmgr[337]: watching 2 sockets Sep 22 18:35:49 netdez_ap_pico cardmgr[337]: watching 2 sockets Sep 22 18:35:49 netdez_ap_pico cardmgr[338]: starting, version is 3.2.1 Sep 22 18:35:49 netdez_ap_pico pcmcia: done. Sep 22 18:35:49 netdez_ap_pico rc: Starting pcmcia succeeded Sep 22 18:35:49 netdez_ap_pico inet: inetd startup succeeded Sep 22 18:35:49 netdez_ap_pico inetd[351]: Online and ready (1 sockets) Sep 22 18:35:49 netdez_ap_pico kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Sep 22 18:35:49 netdez_ap_pico cardmgr[338]: socket 0: Senao SL-2011CD/SL-2011CDPLUS Sep 22 18:35:49 netdez_ap_pico cardmgr[338]: executing: 'modprobe hostap_cs' Sep 22 18:35:49 netdez_ap_pico kernel: hostap_cs: hostap_cs.c 0.0.0 2002-09-12 (SSH Communications Security Corp, Jouni Malinen) Sep 22 18:35:49 netdez_ap_pico kernel: hostap_cs: (c) Jouni Malinen Sep 22 18:35:49 netdez_ap_pico kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 Sep 22 18:35:49 netdez_ap_pico kernel: cs: IO port probe 0x04d8-0x04ff: clean. Sep 22 18:35:49 netdez_ap_pico kernel: cs: IO port probe 0x0800-0x08ff: clean. Sep 22 18:35:49 netdez_ap_pico kernel: cs: IO port probe 0x0a00-0x0aff: clean. Sep 22 18:35:49 netdez_ap_pico kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff Sep 22 18:35:49 netdez_ap_pico kernel: hostap_cs: index 0x01: Vcc 3.3, irq 15, io 0x0100-0x013f Sep 22 18:35:49 netdez_ap_pico kernel: hostap_cs: Registered netdevice wlan0 Sep 22 18:35:50 netdez_ap_pico crond: crond startup succeeded Sep 22 18:35:50 netdez_ap_pico kernel: wlan0: NIC: id=0x800c v1.0.0 Sep 22 18:35:50 netdez_ap_pico kernel: wlan0: PRI: id=0x15 v1.0.4 Sep 22 18:35:50 netdez_ap_pico kernel: wlan0: STA: id=0x1f v1.0.3 Sep 22 18:35:50 netdez_ap_pico cardmgr[338]: executing: './network start wlan0' Sep 22 18:35:50 netdez_ap_pico keytable: Loading keymap: Sep 22 18:35:50 netdez_ap_pico keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz Sep 22 18:35:50 netdez_ap_pico keytable: Loading system font: Sep 22 18:35:50 netdez_ap_pico rc: Starting keytable succeeded Sep 22 18:35:50 netdez_ap_pico cardmgr[338]: socket 1: Senao SL-2011CD/SL-2011CDPLUS Sep 22 18:35:51 netdez_ap_pico kernel: hostap_cs: index 0x01: Vcc 3.3, irq 10, io 0x0140-0x017f Sep 22 18:35:51 netdez_ap_pico kernel: hostap_cs: Registered netdevice wlan1 Sep 22 18:35:51 netdez_ap_pico kernel: wlan1: NIC: id=0x800c v1.0.0 Sep 22 18:35:51 netdez_ap_pico kernel: wlan1: PRI: id=0x15 v1.0.4 Sep 22 18:35:51 netdez_ap_pico kernel: wlan1: STA: id=0x1f v1.0.3 Sep 22 18:35:51 netdez_ap_pico cardmgr[338]: executing: './network start wlan1' Sep 22 18:35:52 netdez_ap_pico kernel: eth0: RealTek RTL8139 Fast Ethernet at 0x6100, IRQ 11, 00:e0:4c:e7:46:dc. Sep 22 18:35:52 netdez_ap_pico kernel: device eth0 entered promiscuous mode Sep 22 18:35:52 netdez_ap_pico kernel: device wlan0 entered promiscuous mode Sep 22 18:35:52 netdez_ap_pico kernel: device wlan1 entered promiscuous mode Sep 22 18:35:52 netdez_ap_pico kernel: br0: port 3(wlan1) entering listening state Sep 22 18:35:52 netdez_ap_pico kernel: br0: port 2(wlan0) entering listening state Sep 22 18:35:52 netdez_ap_pico kernel: br0: port 1(eth0) entering listening state Sep 22 18:36:07 netdez_ap_pico kernel: br0: port 3(wlan1) entering learning state Sep 22 18:36:07 netdez_ap_pico kernel: br0: port 2(wlan0) entering learning state Sep 22 18:36:07 netdez_ap_pico kernel: br0: port 1(eth0) entering learning state Sep 22 18:36:22 netdez_ap_pico kernel: br0: port 3(wlan1) entering forwarding state Sep 22 18:36:22 netdez_ap_pico kernel: br0: topology change detected, propagating Sep 22 18:36:22 netdez_ap_pico kernel: br0: port 2(wlan0) entering forwarding state Sep 22 18:36:22 netdez_ap_pico kernel: br0: topology change detected, propagating Sep 22 18:36:22 netdez_ap_pico kernel: br0: port 1(eth0) entering forwarding state Sep 22 18:36:22 netdez_ap_pico kernel: br0: topology change detected, propagating
The only problem that I get is that sometimes I lose some ping packets of 1500 and before use the last CVS version my syslog report the folowing messages:
Sep 22 15:51:48 netdez_ap_pico kernel: Linux PCMCIA Card Services 3.2.1 Sep 22 15:51:48 netdez_ap_pico kernel: kernel build: 2.2.20-2twb #2 Mon Sep 2 22:18:19 BRT 2002 Sep 22 15:51:48 netdez_ap_pico kernel: options: [pci] [cardbus] [apm] Sep 22 15:51:48 netdez_ap_pico kernel: PCI routing table version 1.0 at 0xf2c00 Sep 22 15:51:48 netdez_ap_pico kernel: 00:08.0 -> irq 1 Sep 22 15:51:48 netdez_ap_pico kernel: Intel ISA/PCI/CardBus PCIC probe: Sep 22 15:51:48 netdez_ap_pico kernel: Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:09, mem 0x68000000 Sep 22 15:51:48 netdez_ap_pico kernel: host opts [0]: [pci only] [io 3/6/1] [mem 3/6/1] [pci irq 15] [lat 32/176] [bus 32/34] Sep 22 15:51:48 netdez_ap_pico kernel: PCI card interrupts, PCI status changes Sep 22 15:51:48 netdez_ap_pico kernel: Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:0b, mem 0x68001000 Sep 22 15:51:48 netdez_ap_pico kernel: host opts [0]: [pci only] [io 3/6/1] [mem 3/6/1] [pci irq 10] [lat 32/176] [bus 35/37] Sep 22 15:51:48 netdez_ap_pico kernel: PCI card interrupts, PCI status changes Sep 22 15:51:48 netdez_ap_pico pcmcia: cardmgr[319]: watching 2 sockets Sep 22 15:51:48 netdez_ap_pico cardmgr[319]: watching 2 sockets Sep 22 15:51:48 netdez_ap_pico cardmgr[320]: starting, version is 3.2.1 Sep 22 15:51:48 netdez_ap_pico pcmcia: done. Sep 22 15:51:48 netdez_ap_pico rc: Starting pcmcia succeeded Sep 22 15:51:49 netdez_ap_pico inet: inetd startup succeeded Sep 22 15:51:49 netdez_ap_pico inetd[333]: Online and ready (1 sockets) Sep 22 15:51:49 netdez_ap_pico kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Sep 22 15:51:49 netdez_ap_pico cardmgr[320]: socket 0: Intersil PRISM2 Reference Design 11Mb/s WLAN Card Sep 22 15:51:49 netdez_ap_pico cardmgr[320]: executing: 'modprobe hostap_cs' Sep 22 15:51:49 netdez_ap_pico kernel: hostap_cs: hostap_cs.c 0.0.0 2002-05-19 (SSH Communications Security Corp, Jouni Malinen) Sep 22 15:51:49 netdez_ap_pico kernel: hostap_cs: (c) SSH Communications Security Corp <jkm_at_ssh.com> Sep 22 15:51:49 netdez_ap_pico kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 Sep 22 15:51:49 netdez_ap_pico kernel: cs: IO port probe 0x04d8-0x04ff: clean. Sep 22 15:51:49 netdez_ap_pico kernel: cs: IO port probe 0x0800-0x08ff: clean. Sep 22 15:51:49 netdez_ap_pico kernel: cs: IO port probe 0x0a00-0x0aff: clean. Sep 22 15:51:49 netdez_ap_pico kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff Sep 22 15:51:49 netdez_ap_pico kernel: hostap_cs: index 0x01: Vcc 3.3, irq 15, io 0x0100-0x013f Sep 22 15:51:49 netdez_ap_pico kernel: hostap_cs: Registered netdevice wlan0 Sep 22 15:51:49 netdez_ap_pico kernel: wlan0: NIC: id=0x800c v1.0.0 Sep 22 15:51:49 netdez_ap_pico kernel: wlan0: PRI: id=0x15 v1.0.4 Sep 22 15:51:49 netdez_ap_pico kernel: wlan0: STA: id=0x1f v1.0.3 Sep 22 15:51:49 netdez_ap_pico cardmgr[320]: executing: './network start wlan0' Sep 22 15:51:50 netdez_ap_pico cardmgr[320]: socket 1: Intersil PRISM2 Reference Design 11Mb/s WLAN Card Sep 22 15:51:51 netdez_ap_pico cardmgr[320]: executing: './network start wlan1' Sep 22 15:51:51 netdez_ap_pico kernel: hostap_cs: index 0x01: Vcc 3.3, irq 10, io 0x0140-0x017f Sep 22 15:51:51 netdez_ap_pico kernel: hostap_cs: Registered netdevice wlan1 Sep 22 15:51:51 netdez_ap_pico kernel: wlan1: NIC: id=0x800c v1.0.0 Sep 22 15:51:51 netdez_ap_pico kernel: wlan1: PRI: id=0x15 v1.0.4 Sep 22 15:51:51 netdez_ap_pico kernel: wlan1: STA: id=0x1f v1.0.3 Sep 22 16:45:22 netdez_ap_pico kernel: hostap_cs: wlan0: resetting card Sep 22 16:48:34 netdez_ap_pico kernel: wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110) Sep 22 16:48:34 netdez_ap_pico kernel: hostap_cs: wlan0: resetting card Sep 22 16:50:08 netdez_ap_pico kernel: wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110) Sep 22 16:50:08 netdez_ap_pico kernel: hostap_cs: wlan0: resetting card Sep 22 16:51:08 netdez_ap_pico kernel: wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110) Sep 22 16:51:08 netdez_ap_pico kernel: hostap_cs: wlan0: resetting card Sep 22 16:54:07 netdez_ap_pico kernel: wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110)
Best regards, and sorry by the long message.
Edson Schmidt
schmidt_at_netdez.net
Brazil already use Hostap.
Many Thanks to Jouni Malinen