From: Glenn.Durfee_at_parc.com
Date: 2002-09-19 23:04:32 UTC
Hi all,
In order to get 802.1x authentication working with dynamic WEP keying (see http://www.open1x.org), a few minor changes to the driver are required. I removed the card reset after setting a WEP key and after enabling/disabling encryption. (This is necessary because a card reset forces the card to reassociate with the access point, which restarts the 1x authentication protocol.) The driver works now with the 1x client 'xsupplicant'. A patch is attached.
Glenn