Re: version of firmwares needed for allowing RAM loading of STA f/w

From: Jouni Malinen (
Date: 2002-09-25 15:39:44 UTC

On Wed, Sep 25, 2002 at 05:27:06PM +0200, Dominique Blas wrote:

> but wich version of primary firmware (or secondary firmware) is needed to
> allow RAM loading of the secondary firmware ?

That depends on which version of the secondary firmware you are going to download..

> I tried to test with prism2_srec and a R010409.HEX

I have successfully downloaded 1.4.9 with primary firmware version 1.0.7 (1.0.5 is too old; don't know about 1.0.6). This was on a Prism2.5 PCI card; YMMV with other cards.. Anyway, this would be easier if also the primary firmware could be downloaded into RAM at the same time. There is an image that might work in this way, but I haven't so far successfully downloaded it with a secondary firmware.

Jouni Malinen                                            PGP id EFC895FA

This archive was generated by hypermail 2.1.4.