Re: DWL-520 Troubles

From: Mike Tyson (
Date: 2002-08-15 06:45:31 UTC

> These are more or less the first things done after card init. If the
> BIOS revision does not explain the problem, you could try increasing
> the
> COR sreset delay in hostap_pci.c by defining

I did what you suggested, recompiled and installed, but unfortunately received the same error:

sbox:/home/devel/hostap# modprobe hostap_pci /lib/modules/2.4.19/net/hostap_pci.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters

/lib/modules/2.4.19/net/hostap_pci.o: insmod 
/lib/modules/2.4.19/net/hostap_pci.o failed
/lib/modules/2.4.19/net/hostap_pci.o: insmod hostap_pci failed


hostap_crypt: registered algorithm 'NULL' hostap_pci: hostap_pci.c 0.0.0 CVS (SSH Communications Security Corp, Jouni Malinen)

hostap_pci: (c) SSH Communications Security Corp <>
hostap_pci: Registered netdevice wlan0
prism2_hw_config: initialized in 5 iterations
wlan0: CMD=0x000a => res=0x7f
wlan0: cannot allocate fid, len=2364

wlan0: CMD=0x000a => res=0x7f
wlan0: cannot allocate fid, len=1600
hostap_pci: Initialization failed
hostap_pci: hardware initialization failed
hostap_pci: Netdevice wlan0 unregistered
prism2_pci: No devices found, driver not installed.
hostap_crypt: unregistered algorithm 'NULL' (deinit)

This archive was generated by hypermail 2.1.4.