Problems going 0.8.3 -> 1.4.9


From: gARetH baBB (hick_at_gink.org)
Date: 2002-08-16 10:26:38 UTC



Kernel 2.2.19
PCMCIA-cs 3.1.33

I decided to upgrade my ZoomAir 4105 card from STA 0.8.3 to 1.4.9 and in the process hostap has stopped working ...

[the flash worked fine before you ask, putting the card in a Windows laptop works etc.]

Putting a ZoomAir 4100 in which I haven't flashed yet, so it's still on 0.8.3, brings it back to life - Prism2-2002-05-19 is fine, though the CVS snapshot kernel panics at some point.

Before I flash the 4105 back to 0.8.3 and leave it for another day, can anyone suggest what is wrong ?

Prism2-2002-05-19 which has been working fine for months with 0.8.3 now produces with 1.4.9:

hostap_cs: hostap_cs.c 0.0.0 2002-05-19 (SSH Communications Security Corp, Jouni Malinen)
hostap_cs: (c) SSH Communications Security Corp <jkm_at_ssh.com>
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
prism2_config()
hostap_cs: setting Vcc=50 (from config)
CISTPL_MANFID: 0x0156, 0x0002

Lucent-based card
Checking CFTABLE_ENTRY 0x01 (default 0x01) IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: index 0x01: Vcc 5.0, irq 5, io 0x0140-0x017f
hostap_cs: Registered netdevice wlan0
prism2_hw_init()
prism2_hw_config: initialized in 9 iterations
wlan0: CMD=0x000a => res=0x7f, resp0=0x0001 wlan0: cannot allocate fid, len=2364
hostap_cs: Initialization failed
eth0: flipped to 10baseT
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004 wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127) RID len mismatch: rid=0xfc23, len=-2 (expected 2) Setting ALC off
wlan0: CMD=0x1538 => res=0x7f, resp0=0x0001 Setting TX power to 20 dBm
wlan0: CMD=0x0031 => res=0x7f, resp0=0x0001
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127)
wlan0: prism2_open
wlan0: CMD=0x0001 => res=0x7f, resp0=0x0001
wlan0: MAC port 0 enabling failed
wlan0: could not enable MAC port
wlan0: prism2_close
wlan0: prism2_open
wlan0: CMD=0x0001 => res=0x7f, resp0=0x0001
wlan0: MAC port 0 enabling failed
wlan0: could not enable MAC port
wlan0: prism2_close


Hostap snapshot from yesterday produces:

hostap_cs: hostap_cs.c 0.0.0 CVS (SSH Communications Security Corp, Jouni Malinen)
hostap_cs: (c) SSH Communications Security Corp <jkm_at_ssh.com>
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
prism2_config()
hostap_cs: setting Vcc=50 (from config)

Checking CFTABLE_ENTRY 0x01 (default 0x01) IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: index 0x01: Vcc 5.0, irq 5, io 0x0140-0x017f
hostap_cs: Registered netdevice wlan0
prism2_hw_init()
prism2_hw_config: initialized in 9 iterations
wlan0: CMD=0x000a => res=0x7f
wlan0: cannot allocate fid, len=2364

wlan0: CMD=0x000a => res=0x7f
wlan0: cannot allocate fid, len=1600
hostap_cs: Initialization failed
wlan0: hfa384x_cmd: entry still in list? (entry=c001b9a0, type=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c001b9a0, type=0, cmd=0x0121, param0=0xfc0e)
wlan0: hfa384x_set_rid_copy: CMDCODE_ACCESS_WRITE failed (res=-110, rid=fc0e, len=34, bap=0)
hostap_cs: wlan0: resetting card
prism2_pccard_cor_sreset: original COR 41
prism2_hw_init()
prism2_hw_config: initialized in 238 iterations
wlan0: CMD=0x000a => res=0x7f
wlan0: cannot allocate fid, len=2364
wlan0: CMD=0x000a => res=0x7f
wlan0: cannot allocate fid, len=1600

hostap_cs: Initialization failed
wlan0: could not initialize WEP: load module hostap_crypt_wep.o
wlan0: hfa384x_cmd: entry still in list? (entry=c001b9a0, type=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c001b9a0, type=0, cmd=0x0021, param0=0xfdc6)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
Setting ALC off
wlan0: hfa384x_cmd: entry still in list? (entry=c001b9a0, type=0) wlan0: hfa384x_cmd: command was not completed (res=0, entry=c001b9a0, type=0, cmd=0x1538, param0=0x0000) Setting TX power to 20 dBm
wlan0: hfa384x_cmd_issue: cmd reg was busy for 1000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8021
wlan0: hfa384x_cmd_issue: cmd reg was busy for 1000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8000
wlan0: hfa384x_set_rid_copy: CMDCODE_ACCESS_WRITE failed (res=-110, rid=fc02, len=34, bap=0)
hostap_cs: wlan0: resetting card
prism2_pccard_cor_sreset: original COR 41
prism2_hw_init()
prism2_hw_config: initialized in 215 iterations
wlan0: CMD=0x000a => res=0x7f
wlan0: cannot allocate fid, len=2364
wlan0: CMD=0x000a => res=0x7f
wlan0: cannot allocate fid, len=1600

hostap_cs: Initialization failed
wlan0: prism2_open
wlan0: hfa384x_cmd: entry still in list? (entry=c001b9a0, type=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c001b9a0, type=0, cmd=0x0001, param0=0x0000)
wlan0: MAC port 0 enabling failed
wlan0: could not enable MAC port
wlan0: prism2_close
wlan0: prism2_open
wlan0: hfa384x_cmd: entry still in list? (entry=c001ba90, type=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c001ba90, type=0, cmd=0x0001, param0=0x0000)
wlan0: MAC port 0 enabling failed
wlan0: could not enable MAC port
wlan0: prism2_close


This archive was generated by hypermail 2.1.4.