Re: More on my Netgear problems

From: Eric Benard / FREE (ebenard_at_free.fr)
Date: 2002-05-27 18:52:15 UTC

• Next message: Hakan Lennestal: "Addition to hostap_cs.conf"
• Previous message: Jouni Malinen: "Read-only CVS access / stable branch"
• In reply to: Povl H. Pedersen: "More on my Netgear problems"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

exactly the same problem here. My freeze problem is solved (or atr least I believe it's solved : this was coming from an IRQ sharing problem).

The card starts at full rate (11M) and then comes donw to 1 then up then down ... and at the end it stops to work. But I keep on having this king of log, as well as after a certain amount of time (when it stops to work) :
wlan0: prism2_tx: hw not ready - skipping wlan0: prism2_tx: hw not ready - skipping

Best regards

Eric

Povl H. Pedersen wrote:
> May 27 17:43:30 home kernel: wlan0: TXEXC - fid=0x0496 - status=0x0001
> ([RetryErr]) tx_control=000c
> May 27 17:43:30 home kernel: retry_count=0 tx_rate=10 fc=0x0a08
> (Data::0)
> May 27 17:43:30 home kernel: addr1=00:30:ab:17:0a:6c
> addr2=00:30:ab:11:62:e8 addr3=00:02:4b:df:57:70
> May 27 17:43:36 home kernel: wlan0: TXEXC - fid=0x034f - status=0x0001
> ([RetryErr]) tx_control=000c
> May 27 17:43:36 home kernel: retry_count=0 tx_rate=10 fc=0x0a08
> (Data::0)
> May 27 17:43:36 home kernel: addr1=00:30:ab:17:0a:6c
> addr2=00:30:ab:11:62:e8 addr3=00:02:4b:df:57:70
>

• Next message: Hakan Lennestal: "Addition to hostap_cs.conf"
• Previous message: Jouni Malinen: "Read-only CVS access / stable branch"
• In reply to: Povl H. Pedersen: "More on my Netgear problems"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]