Trouble with Compaq WL200

From: Matthew Richards (matt_at_richardsfamily.net)
Date: 2002-02-27 10:20:16 UTC

Next message: Nigel Jones: "Fw: 2002-02-13 driver, WEP"
Previous message: Marc-Aurèle Brothier: "AP mode : Rate"
Next in thread: Cliff Albert: "Re: Trouble with Compaq WL200"
Reply: Cliff Albert: "Re: Trouble with Compaq WL200"
Maybe reply: Matthew Richards: "RE: Trouble with Compaq WL200"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi all,

I'm trying to get my RH 7.2 gateway box to work as an AP using a WL200 to a Win2k/WL100 laptop.. I did get the 2 to link up in Ad-Hoc mode, but I couldnt get any traffic between them. One thing that might be a problem.. they both had their firemware flashed to 0.8.0 - would that be a problem?

Any help would be greatly appreciated.

Thanks,
Matt

Feb 27 20:48:51 shakesbeare kernel: Linux PCMCIA Card Services 3.1.31 Feb 27 20:48:51 shakesbeare kernel: kernel build: 2.4.18 #4 Tue Feb 26 21:58:37 EST 2002

Feb 27 20:48:51 shakesbeare kernel:   options:  [pci] [cardbus]
Feb 27 20:48:51 shakesbeare kernel: Intel ISA/PCI/CardBus PCIC probe:
Feb 27 20:48:51 shakesbeare kernel: PCI: Found IRQ 11 for device 00:0d.0
Feb 27 20:48:51 shakesbeare kernel: PCI: Sharing IRQ 11 with 00:07.2
Feb 27 20:48:51 shakesbeare kernel:   Cirrus PD6729 rev 00 PCI-to-PCMCIA at
slot 00:0d, port 0x9800
Feb 27 20:48:51 shakesbeare kernel:     host opts [0]: [ring] [pci irq 11]


[1/5/0] [1/20/0]

Feb 27 20:48:51 shakesbeare kernel:     host opts [1]: [ring] [pci irq 11]


[1/5/0] [1/20/0]

Feb 27 20:48:51 shakesbeare kernel:     PCI card interrupts, PCI status

changes

Feb 27 20:48:51 shakesbeare cardmgr[5060]: starting, version is 3.1.31
Feb 27 20:48:51 shakesbeare cardmgr[5060]: watching 2 sockets
Feb 27 20:48:51 shakesbeare kernel: cs: memory probe 0x0d0000-0x0dffff:

clean.

Feb 27 20:48:51 shakesbeare cardmgr[5060]: socket 0: Compaq WL200
Feb 27 20:48:51 shakesbeare cardmgr[5060]: executing: 'modprobe prism2'
Feb 27 20:48:51 shakesbeare cardmgr[5060]: + modprobe: Can't locate module

prism2
Feb 27 20:48:51 shakesbeare cardmgr[5060]: modprobe exited with status 255 Feb 27 20:48:51 shakesbeare cardmgr[5060]: executing: 'insmod /lib/modules/2.4.18/pcmcia/prism2.o'
Feb 27 20:48:51 shakesbeare kernel: prism2: prism2.c 0.0.0 2002-02-13 (SSH Communications Security Corp, Jouni Malinen) Feb 27 20:48:51 shakesbeare kernel: prism2: (c) SSH Communications Security Corp <jkm_at_ssh.com>
Feb 27 20:48:51 shakesbeare kernel: Config has no IRQ info, but trying to enable IRQ anyway..
Feb 27 20:48:51 shakesbeare kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7

Feb 27 20:48:52 shakesbeare kernel: cs: IO port probe 0x0380-0x03bf: clean.
Feb 27 20:48:52 shakesbeare kernel: cs: IO port probe 0x03e0-0x04cf: clean.
Feb 27 20:48:52 shakesbeare kernel: cs: IO port probe 0x04d8-0x04ff: clean.
Feb 27 20:48:52 shakesbeare kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Feb 27 20:48:52 shakesbeare kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Feb 27 20:48:52 shakesbeare kernel: prism2: index 0x01: Vcc 3.3, irq 11, io

0x0100-0x013f

Feb 27 20:48:52 shakesbeare kernel: prism2: Registered netdevice wlan0
Feb 27 20:48:52 shakesbeare kernel: wlan0: NIC: id=0x8002 v1.0.1
Feb 27 20:48:52 shakesbeare kernel: wlan0: PRI: id=0x15 v0.3.0
Feb 27 20:48:52 shakesbeare kernel: wlan0: STA: id=0x1f v0.8.0
Feb 27 20:48:52 shakesbeare cardmgr[5060]: executing: './network start

wlan0'
Feb 27 20:48:52 shakesbeare cardmgr[5060]: + /usr/local/sbin/iwconfig wlan0 essid "matt"

Feb 27 20:48:52 shakesbeare kernel: wlan0: hfa384x_setup_bap - timeout3
Feb 27 20:48:52 shakesbeare kernel: wlan0: hfa384x_set_rid - to BAP0 failed
Feb 27 20:48:52 shakesbeare kernel: prism2: wlan0: resetting card
Feb 27 20:48:52 shakesbeare cardmgr[5060]: + Error for wireless request "Set

ESSID" (8B1A) :
Feb 27 20:48:52 shakesbeare kernel: wlan0: TXRateControl setting to 15 failed

Feb 27 20:48:52 shakesbeare kernel: wlan0: hfa384x_setup_bap - timeout3
Feb 27 20:48:52 shakesbeare kernel: wlan0: hfa384x_set_rid - to BAP0 failed
Feb 27 20:48:52 shakesbeare kernel: prism2: wlan0: resetting card
Feb 27 20:48:52 shakesbeare cardmgr[5060]: +     SET failed on device wlan0

; Invalid argument.

# iwconfig wlan0
Warning : Device wlan0 has been compiled with version 12 of Wireless Extension, while we are using version 11. Some things may be broken...

wlan0     IEEE 802.11-DS  ESSID:"matt"
          Mode:Managed  Frequency:2.412GHz  Access Point: 44:44:44:44:44:44
          Bit Rate:2Mb/s   Tx-Power:10 dBm   Sensitivity=1/3
          Retry min limit:8   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  invalid crypt:0  invalid misc:0

Next message: Nigel Jones: "Fw: 2002-02-13 driver, WEP"
Previous message: Marc-Aurèle Brothier: "AP mode : Rate"
Next in thread: Cliff Albert: "Re: Trouble with Compaq WL200"
Reply: Cliff Albert: "Re: Trouble with Compaq WL200"
Maybe reply: Matthew Richards: "RE: Trouble with Compaq WL200"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2.1.4.