From: Scott Wiles (coachcartman_at_yahoo.com)
Date: 2002-01-26 05:27:50 UTC
Hello All--
I am having a problem with my USR 2410 in a DataChute PCI->PCMCIA bridge.
I am running RH 7.2 with kernel 2.4.7-10, using PC Card Services 3.1.31. I am able to use my Cisco Aironet 350 card with this setup, using the same IO and IRQ settings.
When I insert my USR 2410 card, the system locks up until I eject the card. My system functions normal once the card is ejected. Here is an excerpt from the syslog:
Jan 25 23:09:39 testap cardmgr[1424]: socket 1: U.S.
Robotics IEEE 802.11b PC-CA
RD
Jan 25 23:09:39 testap cardmgr[1424]: executing:
'modprobe prism2'
Jan 25 23:09:39 testap kernel: prism2: prism2.c 0.0.0
2002-01-03 (SSH Communicat
ions Security Corp, Jouni Malinen)
Jan 25 23:09:39 testap kernel: prism2: (c) SSH
Communications Security Corp <jkm
@ssh.com>
Jan 25 23:09:39 testap kernel: prism2: index 0x01: Vcc
5.0, irq 7, io 0x0180-0x0
1bf
Jan 25 23:09:48 testap kernel: prism2: Registered
netdevice wlan0
Jan 25 23:09:48 testap kernel: wlan0: NIC: id=0x8002
v1.0.0
Jan 25 23:09:48 testap kernel: wlan0: PRI: id=0x15
v0.3.0
Jan 25 23:09:48 testap kernel: wlan0: STA: id=0x1f
v0.7.6
Jan 25 23:09:48 testap kernel: wlan0: hfa384x_cmd -
timeout - reg=0xffff
Jan 25 23:09:48 testap kernel: wlan0: MAC port 0
reseting failed
Jan 25 23:09:48 testap kernel: prism2: Initialization
failed
Jan 25 23:09:49 testap kernel: prism2: card already
removed
Jan 25 23:09:49 testap cardmgr[1424]: executing:
'./network start wlan0'
Jan 25 23:09:49 testap cardmgr[1424]: executing:
'./network stop wlan0'
Jan 25 23:09:49 testap cardmgr[1424]: executing:
'modprobe -r prism2'
Jan 25 23:09:49 testap kernel: prism2: Netdevice
unregistered
Jan 25 23:09:49 testap kernel: prism2: Driver unloaded
Anyone successfully using this card? Anyone see this problem before?
Thanks!
Scott Wiles
swiles_at_writeme.com