path: root/wpa_supplicant/config_ssid.h
Commit message (Collapse)AuthorAgeFilesLines
* wpa_supplicant: Add wps_disabled parameter to network blockLior David2016-05-141-0/+8
| | | | | | | Add a new parameter wps_disabled to network block (wpa_ssid). This parameter allows WPS functionality to be disabled in AP mode. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
* wpa_supplicant: "don't care" value for pbss in ssid structureLior David2016-04-081-2/+6
| | | | | | | | | | Add a new value 2 to the pbss parameter of wpa_ssid structure, which means "don't care". This value is used in infrastructure mode to request connection to either AP or PCP, whichever is available in the scan results. The value is also used in regular WPS (not P2P group formation) to make WPS work with devices running as either AP or PCP. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
* wpa_supplicant: Basic support for PBSS/PCPLior David2016-02-081-0/+9
| | | | | | | | | | | | | | | | | | | | | PBSS (Personal Basic Service Set) is a new BSS type for DMG networks. It is similar to infrastructure BSS, having an AP-like entity called PCP (PBSS Control Point), but it has few differences. PBSS support is mandatory for IEEE 802.11ad devices. Add a new "pbss" argument to network block. The argument is used in the following scenarios: 1. When network has mode=2 (AP), when pbss flag is set will start as a PCP instead of an AP. 2. When network has mode=0 (station), when pbss flag is set will connect to PCP instead of AP. The function wpa_scan_res_match() was modified to match BSS according to the pbss flag in the network block (wpa_ssid structure). When pbss flag is set it will match only PCPs, and when it is clear it will match only APs. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
* wpa_supplicant: Enable Automatic Channel Selection support for AP modeTomasz Bursztyka2015-12-241-0/+12
| | | | | | | | | | Since hostapd supports ACS now, let's enable its support in wpa_supplicant as well when starting AP mode. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com> [u.oelmann@pengutronix.de: rebased series from hostap_2_1~944 to master] [u.oelmann@pengutronix.de: adjusted added text in defconfig] Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
* P2P: Add support for VHT 80+80 MHz and 160 MHzAhmad Kholaif2015-11-251-0/+4
| | | | | | | | | The new max_oper_chwidth and freq2 arguments to P2P_CONNECT, P2P_INVITE, and P2P_GROUP_ADD control interface commands can be used to request larger VHT operating channel bandwidth to be used than the previously used maximum 80 MHz. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
* Make it clearer that ap_scan=2 mode should not be used with nl80211Jouni Malinen2015-09-041-1/+3
| | | | | | | Add more details into configuration comments and a runtime info message if ap_scan=2 is used with the nl80211 driver interface. Signed-off-by: Jouni Malinen <j@w1.fi>
* Remove WEP40/WEP104 cipher suite support for WPA/WPA2Jouni Malinen2015-06-201-2/+1
| | | | | | | | | As far as IEEE 802.11 standard is concerned, WEP is deprecated, but at least in theory, allowed as a group cipher. This option is unlikely to be deployed anywhere and to clean up the implementation, we might as well remove all support for this combination. Signed-off-by: Jouni Malinen <j@w1.fi>
* Replace MAX_SSID_LEN with SSID_MAX_LENJouni Malinen2015-04-221-2/+0
| | | | | | | | This makes source code more consistent. The use within Android driver interface is left as-is to avoid changes in the old PNO interface definition. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
* Allow PSK/passphrase to be set only when neededJouni Malinen2015-03-281-0/+8
| | | | | | | | | | | | | | | | | | | | | The new network profile parameter mem_only_psk=1 can be used to specify that the PSK/passphrase for that network is requested over the control interface (ctrl_iface or D-Bus) similarly to the EAP network parameter requests. The PSK/passphrase can then be configured temporarily in a way that prevents it from getting stored to the configuration file. For example: Event: CTRL-REQ-PSK_PASSPHRASE-0:PSK or passphrase needed for SSID test-wpa2-psk Response: CTRL-RSP-PSK_PASSPHRASE-0:"qwertyuiop" Note: The response value uses the same encoding as the psk network profile parameter, i.e., passphrase is within double quotation marks. Signed-off-by: Jouni Malinen <j@w1.fi>
* IBSS: Add fixed_freq network parameterJanusz Dziedzic2015-02-211-0/+5
| | | | | | | | Add fixed_freq=<0/1> network block parameter and pass it to the driver when starting or joining an IBSS. If this flag is set, IBSS should not try to look for other IBSS networks to merge with on different channels. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
* Add network specific BSSID black and white listsStefan Tomanek2015-01-101-0/+12
| | | | | | | | | | | | This change adds the configuration options "bssid_whitelist" and "bssid_blacklist" used to limit the AP selection of a network to a specified (finite) set or discard certain APs. This can be useful for environments where multiple networks operate using the same SSID and roaming between those is not desired. It is also useful to ignore a faulty or otherwise unwanted AP. Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
* Remove mesh_ht_mode network block parameterJouni Malinen2015-01-101-10/+0
| | | | | | | | | There should not be a mesh-specific mechanism for setting up channel parameters since that will just result in duplicated code. IBSS, mesh, and AP mode can use the same data structures and parameters for setting up such parameters. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Make plink params configurableMasashi Honma2014-11-161-0/+12
| | | | | | | This patch makes four MIB variables for plink configurable and sets the correct default values based on IEEE Std 802.11s-2011. Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* mesh: Make BSSBasicRateSet configurableMasashi Honma2014-11-161-0/+6
| | | | | | | | | | | | | STAs that have different BSSBasicRateSet cannot connect to each other as per IEEE 802.11s-2011 9.6.0c1: "A mesh STA shall not establish a mesh peering with a mesh STA using a different BSSBasicRateSet." Make BSSBasicRateSet configurable to improve interoperability with other stations. Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* mesh: Enable mesh HT modeJason Mobarak2014-11-161-0/+10
| | | | | | | | | | | | Add a new option "mesh_ht_mode" that specifies the HT mode for the mesh, with this option on, mesh beacons, actions frames, and probe responses with include the appropriate HT information elements. [original implementation by Chun-Yeow Yeoh <yeohchunyeow@gmail.com>] [some fixes by Masashi Honma <masashi.honma@gmail.com>] Signed-off-by: Ashok Nagarajan <ashok.dragon@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
* mesh: Add no_auto_peer config optionThomas Pedersen2014-10-251-0/+8
| | | | | | | | | | Add no_auto_peer parameter, which controls wheter a station will automatically initiate peering to another mesh peer that comes into range. Signed-off-by: Javier Lopez <jlopex@gmail.com> Signed-off-by: Jason Mobarak <x@jason.mobarak.name> Signed-off-by: Thomas Pedersen <thomas@noack.us>
* mesh: Add mesh mode config optionThomas Pedersen2014-10-251-0/+3
| | | | | | | | | Modify network mode to support mode number 5 when CONFIG_MESH is enabled. Signed-off-by: Javier Lopez <jlopex@gmail.com> Signed-off-by: Jason Mobarak <x@jason.mobarak.name> Signed-off-by: Thomas Pedersen <thomas@noack.us>
* Extend random MAC address support to allow OUI to be keptJouni Malinen2014-09-291-0/+1
| | | | | | | | | | mac_addr=2 and preassoc_mac_addr=2 parameters can now be used to configure random MAC address to be generated by maintaining the OUI part of the permanent MAC address (but with locally administered bit set to 1). Other than that, these values result in similar behavior with mac_addr=1 and preassoc_mac_addr=1, respectively. Signed-off-by: Jouni Malinen <j@w1.fi>
* Add support for using random local MAC addressJouni Malinen2014-09-271-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds experimental support for wpa_supplicant to assign random local MAC addresses for both pre-association cases (scan, GAS/ANQP) and for connections. MAC address policy for each part can be controlled separately and the connection part can be set per network block. This requires support from the driver to allow local MAC address to be changed if random address policy is enabled. It should also be noted that number of drivers would not support concurrent operations (e.g., P2P and station association) with random addresses in use for one or both. This functionality can be controlled with the global configuration parameters mac_addr and preassoc_mac_addr which set the default MAC address policies for connections and pre-association operations (scan and GAS/ANQP while not connected). The global rand_addr_lifetime parameter can be used to set the lifetime of a random MAC address in seconds (default: 60 seconds). This is used to avoid unnecessarily frequent MAC address changes since those are likely to result in driver clearing most of its state. It should be noted that the random MAC address does not expire during an ESS connection, i.e., this lifetime is only for the case where the device is disconnected. The mac_addr parameter can also be set in the network blocks to define different behavior per network. For example, the global mac_addr=1 and preassoc_mac_addr=1 settings and mac_addr=0 in a home network profile would result in behavior where all scanning is performed using a random MAC address while connections to new networks (e.g., Interworking/Hotspot 2.0) would use random address and connections to the home network would use the permanent MAC address. Signed-off-by: Jouni Malinen <j@w1.fi>
* WPS: Merge mixed-WPA/WPA2 credentials if received in same sessionHu Wang2014-08-291-0/+2
| | | | | | | | | | | Some deployed APs send two credentials when in mixed-WPA/WPA2 configuration; one for the WPA-Personal/TKIP and the other for WPA2-Personal/CCMP. Previously, this would result in two network blocks getting added for the single AP. This can be somewhat confusing and unnecessary, so merge such credentials into a single one that allows both WPA and WPA2 to be used. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
* HS 2.0R2: Add update_identifier field to networkDmitry Shmidt2014-07-021-0/+4
| | | | | | | | | This can be used to configure a Hotspot 2.0 Release 2 network externally for a case where wpa_supplicant-based Interworking network selection is not used and the update_identifier cannot be copied directly from a cred. Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
* MACsec: wpa_supplicant integrationHu Wang2014-05-091-0/+11
| | | | | | Add MACsec to the wpa_supplicant build system and configuration file. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
* Add SIM identifier to the network profile and cred blockNaresh Jayaram2014-04-241-0/+1
| | | | | | | | | | This allows the specific SIM to be identified for authentication purposes in multi-SIM devices. This SIM number represents the index of the SIM slot. This SIM number shall be used for the authentication using the respective SIM for the Wi-Fi connection to the corresponding network. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
* Allow HT 40 MHz intolerant flag to be set for associationJouni Malinen2014-04-171-0/+5
| | | | | | | This extends HT overrides to allow HT 40 MHz intolerant flag to be set with ht40_intolerant=1. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
* wpa_supplicant: Allow disabling LDPCPawel Kulakowski2014-04-011-0/+9
| | | | | | | Allows user to disable LDPC coding. This possibility is useful for testing purpose. Signed-off-by: Pawel Kulakowski <pawel.kulakowski@tieto.com>
* wpa_supplicant: Use monotonic time for temp-disabled networksJohannes Berg2013-12-241-1/+1
| | | | | | | Temporarily disabled networks are disabled for a certain duration, so the code should use monotonic time. Signed-hostap: Johannes Berg <johannes.berg@intel.com>
* Update IBSS documentation to include RSN optionJouni Malinen2013-12-231-6/+7
| | | | Signed-hostap: Jouni Malinen <j@w1.fi>
* P2P: Allow GO P2P Device Address to be used for scan result matchingJouni Malinen2013-11-071-0/+5
| | | | | | | | This is a better way of matching P2P groups based on the unique P2P Device Address (e.g., from P2P Group ID) and SSID pair instead of using the not necessarily unique P2P Interface Address. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
* P2P: Add VHT parameter to P2P operationsEliad Peller2013-10-271-0/+2
| | | | | | | | | | | | Add the option to ask for VHT operation similarly to the way ht40 is configured - either by adding 'vht' param to the relevant p2p_* commands or by configuring p2p_go_vht=1 in the configuration file. This patch only adds the configuration option (e.g., via control interface). The actual handling of the VHT parameter (asking the driver to use VHT, etc.) will be done by the following patch. Signed-hostap: Eliad Peller <eliadx.peller@intel.com>
* P2P: Maintain list of per-client PSKs for persistent groupsJouni Malinen2013-09-011-1/+14
| | | | | | | | | Record all generated per-client PSKs in the persistent group network block and configure these for the GO Authenticator whenever re-starting the persistent group. This completes per-client PSK support for persistent groups. Signed-hostap: Jouni Malinen <j@w1.fi>
* wpa_supplicant: Support VHT capability overridesJohannes Berg2013-03-101-0/+29
| | | | | | | | | Add support for VHT capability overrides to allow testing connections with a subset of the VHT capabilities that are actually supported by the device. The only thing that isn't currently supported (by mac80211 and this code) is the RX/TX highest rate field. Signed-hostap: Johannes Berg <johannes.berg@intel.com>
* Allow wpa_supplicant AP mode to configure Beacon intervalJouni Malinen2013-03-011-0/+5
| | | | | | | | | | | | | | | beacon_int (in TU) can now be used to configure Beacon interval for AP mode operations (including P2P GO) in wpa_supplicant. This can be set either in a network block or as a global parameter in the configuration file (or with "SET beacon_int <value>" control interface command) to apply for all networks that do not include the beacon_int parameter to override the default. In addition, this commits extends the dtim_period parameter to be available as a global parameter to set the default value. dtim_period is now stored in the configuration file, too, if it was set. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
* wpa_supplicant: Allow user to disable short guard interval (SGI)Ben Greear2012-12-181-0/+9
| | | | | | | | Requires Linux kernel patch to make the SGI-20 properly disabled. SGI-40 will already work since Linux 3.4 or so. Signed-hostap: Ben Greear <greearb@candelatech.com> Signed-off-by: Ben Greear <greearb@candelatech.com>
* Allow PMF to be enabled by defaultJouni Malinen2012-11-241-0/+6
| | | | | | | | | | Previously, PMF (protected management frames, IEEE 802.11w) could be enabled only with a per-network parameter (ieee80211w). The new global parameter (pmf) can now be used to change the default behavior to be PMF enabled (pmf=1) or required (pmf=2) for network blocks that do not override this with the ieee80211w parameter. Signed-hostap: Jouni Malinen <j@w1.fi>
* HS 2.0: Remove temporary network block on cred block removalJouni Malinen2012-11-241-0/+9
| | | | | | | If the credential that was used to create a temporary HS 2.0 network block is removed, remove the network block, too. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
* Allow OKC to be enabled by defaultJouni Malinen2012-11-121-1/+6
| | | | | | | | | | | Previously, OKC (opportunistic key caching, a.k.a. proactive key caching) could be enabled only with a per-network parameter (proactive_key_caching). The new global parameter (okc) can now be used to change the default behavior to be OKC enabled (okc=1) for network blocks that do not override this with the proactive_key_caching parameter. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
* WPS: Reenable the networks disabled during wpa_wpas_reassocSunil Dutt2012-10-041-0/+8
| | | | | | | | During the association for the WPS handshake all the other configured networks are disabled. This patch makes wpa_supplicant reenable the disabled networks after the success/failure of the WPS handshake. Signed-hostap: Sunil Dutt Undekari <duttus@codeaurora.org>
* Disable network block temporarily on authentication failuresJouni Malinen2012-08-261-0/+10
| | | | | | | | If 4-way handshake fails due to likely PSK failure or if EAP authentication fails, disable the network block temporarily. Use longer duration if multiple consecutive failures are seen. Signed-hostap: Jouni Malinen <j@w1.fi>
* P2P: Limit maximum number of stored P2P clients to 100Jouni Malinen2012-08-231-0/+4
| | | | | | | | | This limits the maximum size of the p2p_client_list parameter that is maintained at the GO for a persistent group. In other words, only the 100 most recently seen P2P clients are kept in the list. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com> intended-for: hostap-1
* P2P: Enable 40 MHz support for autonomous P2P group additionRajkumar Manoharan2012-08-151-0/+2
| | | | | | | | Add optional "ht40" argument for p2p_group_add command to enable 40 MHz in 5GHz band. This configures the secondary channel, when HT support is enabled and if the HW supports 40 MHz channel width. Signed-hostap: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
* EXT PW: Add framework for supporting external password storageJouni Malinen2012-08-031-0/+8
| | | | | | | | | | | This new mechanism can be used to make wpa_supplicant using external storage (e.g., key store in the operating system) for passwords, passphrases, and PSKs. This commit is only adding the framework part needed to support this, i.e., no actual configuration parameter can yet use this new mechanism. In addition, only a simple test backend is added to allow developer testing of the functionality. Signed-hostap: Jouni Malinen <j@w1.fi>
* wpa_supplicant: Support dtim_period configuration for AP modeEtay Luz2012-06-041-0/+6
| | | | Signed-off-by: Etay Luz <eluz@qca.qualcomm.com>
* Allow background scan period to be configuredBala Shanmugam2012-03-301-0/+7
| | | | | | | | A network block specific background scan period can now be configured for drivers that implement internal background scan mechanism for roaming and BSS selection. Signed-hostap: Bala Shanmugam <bkamatch@qca.qualcomm.com>
* wpa_supplicant: Add provision to configure inactivity period in AP modeVasanthakumar Thiagarajan2012-03-271-0/+8
| | | | | | | | This patch adds a configuration in network block, ap_max_inactivity, for station's inactivity period when in AP mode. The time period is configured in seconds, by default 300 seconds. Signed-hostap: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
* Add support for hidden SSID in wpa_supplicant AP modeVivek Natarajan2012-02-271-0/+14
| | | | | | | This also disables WPS support if hidden SSID is enabled in AP mode. Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
* Remove the GPL notification from files contributed by Jouni MalinenJouni Malinen2012-02-111-8/+2
| | | | | | | Remove the GPL notification text from the files that were initially contributed by myself. Signed-hostap: Jouni Malinen <j@w1.fi>
* Support HT capability overridesBen Greear2012-01-291-0/+54
| | | | | | | | | | | | | | | | | | | | | | This allows HT capabilities overrides on kernels that support these features. MCS Rates can be disabled to force to slower speeds when using HT. Rates cannot be forced higher. HT can be disabled, forcing an 802.11a/b/g/n station to act like an 802.11a/b/g station. HT40 can be disabled. MAX A-MSDU can be disabled. A-MPDU Factor and A-MPDU Density can be modified. Please note that these are suggestions to the kernel. Only mac80211 drivers will work at all. The A-MPDU Factor can only be decreased and the A-MPDU Density can only be increased currently. Signed-hostap: Ben Greear <greearb@candelatech.com>
* P2P: Maintain a list of P2P Clients for persistent group on GOJouni Malinen2011-12-221-0/+14
| | | | | | | | | | Add a new persistent group network block field, p2p_client_list, to maintain a list of P2P Clients that have connected to a persistent group. This allows GO of a persistent group to figure out more easily whether re-invocation of a persistent group can be used with a specific peer device. Signed-hostap: Jouni Malinen <j@w1.fi>
* DBus: Publish provisioned keys in network propertiesJohannes Berg2011-02-021-0/+8
| | | | | | | | | When the network was provisioned, we need to get the keys to be able to reconnect without new provisioning. To be able to publish those keys but not normally configured ones, add a new attribute to struct wpa_ssid indicating whether or not keys may be exported. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* P2P: Add dynamic network config block parameters for P2PJouni Malinen2010-09-091-0/+27