path: root/hostapd/hostapd.conf
diff options
Diffstat (limited to 'hostapd/hostapd.conf')
1 files changed, 4 insertions, 4 deletions
diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index eaff3dd..95d6af9 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -2,10 +2,10 @@
# Empty lines and lines starting with # are ignored
# AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for
-# management frames); ath0 for madwifi
+# management frames with the Host AP driver); wlan0 with many nl80211 drivers
-# In case of madwifi, atheros, and nl80211 driver interfaces, an additional
+# In case of atheros and nl80211 driver interfaces, an additional
# configuration parameter, bridge, may be used to notify hostapd if the
# interface is included in a bridge. This parameter is not used with Host AP
# driver. If the bridge parameter is not set, the drivers will automatically
@@ -18,7 +18,7 @@ interface=wlan0
# interface is also created.
-# Driver interface type (hostap/wired/madwifi/test/none/nl80211/bsd);
+# Driver interface type (hostap/wired/test/none/nl80211/bsd);
# default: hostap). nl80211 is used with all Linux mac80211 drivers.
# Use driver=none if building hostapd as a standalone RADIUS server that does
# not control any wireless/wired driver.
@@ -221,7 +221,7 @@ fragm_threshold=2346
# Station MAC address -based authentication
# Please note that this kind of access control requires a driver that uses
# hostapd to take care of management frame processing and as such, this can be
-# used with driver=hostap or driver=nl80211, but not with driver=madwifi.
+# used with driver=hostap or driver=nl80211, but not with driver=atheros.
# 0 = accept unless in deny list
# 1 = deny unless in accept list
# 2 = use external RADIUS server (accept/deny lists are searched first)