aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--hostapd/README-WPS47
-rw-r--r--wpa_supplicant/README-WPS19
2 files changed, 66 insertions, 0 deletions
diff --git a/hostapd/README-WPS b/hostapd/README-WPS
index e435a56..59848bd 100644
--- a/hostapd/README-WPS
+++ b/hostapd/README-WPS
@@ -144,6 +144,10 @@ provided for each Enrollee (separated with tabulators):
Example line in the /var/run/hostapd.pin-req file:
1200188391 53b63a98-d29e-4457-a2ed-094d7e6a669c Intel(R) Centrino(R) Intel Corporation Intel(R) Centrino(R) - - 1-0050F204-1
+Control interface data:
+WPS-PIN-NEEDED [UUID-E|MAC Address|Device Name|Manufacturer|Model Name|Model Number|Serial Number|Device Category]
+For example:
+<2>WPS-PIN-NEEDED [53b63a98-d29e-4457-a2ed-094d7e6a669c|02:12:34:56:78:9a|Device|Manuf|Model|Model Number|Serial Number|1-0050F204-1]
When the user enters a PIN for a pending Enrollee, e.g., on the web
UI), hostapd needs to be notified of the new PIN over the control
@@ -178,3 +182,46 @@ hostapd_cli wps_pbc
At this point, the client has two minutes to complete WPS negotiation
which will generate a new WPA PSK in the same way as the PIN method
described above.
+
+
+Credential generation and configuration changes
+-----------------------------------------------
+
+By default, hostapd generates credentials for Enrollees and processing
+AP configuration updates internally. However, it is possible to
+control these operations from external programs, if desired.
+
+The internal credential generation can be disabled with
+skip_cred_build=1 option in the configuration. extra_cred option will
+then need to be used to provide pre-configured Credential attribute(s)
+for hostapd to use. The exact data from this binary file will be sent,
+i.e., it will have to include valid WPS attributes. extra_cred can
+also be used to add additional networks if the Registrar is used to
+configure credentials for multiple networks.
+
+Processing of received configuration updates can be disabled with
+wps_cred_processing=1 option. When this is used, an external program
+is responsible for creating hostapd configuration files and processing
+configuration updates based on messages received from hostapd over
+control interface. This will also include the initial configuration on
+first successful registration if the AP is initially set in
+unconfigured state.
+
+Following control interface messages are sent out for external programs:
+
+WPS-REG-SUCCESS <Enrollee MAC address <UUID-E>
+For example:
+<2>WPS-REG-SUCCESS 02:66:a0:ee:17:27 2b7093f1-d6fb-5108-adbb-bea66bb87333
+
+This can be used to tricker change from unconfigured to configured
+state (random configuration based on the first successful WPS
+registration). In addition, this can be used to update AP UI about the
+status of WPS registration progress.
+
+
+WPS-NEW-AP-SETTINGS <hexdump of AP Setup attributes>
+For example:
+<2>WPS-NEW-AP-SETTINGS 10260001011045000c6a6b6d2d7770732d74657374100300020020100f00020008102700403065346230343536633236366665306433396164313535346131663462663731323433376163666462376633393965353466316631623032306164343438623510200006024231cede15101e000844
+
+This can be used to update the externally stored AP configuration and
+then update hostapd configuration (followed by restarting of hostapd).
diff --git a/wpa_supplicant/README-WPS b/wpa_supplicant/README-WPS
index 284753f..7fd358d 100644
--- a/wpa_supplicant/README-WPS
+++ b/wpa_supplicant/README-WPS
@@ -163,3 +163,22 @@ how WPS support can be integrated into the GUI. Its main window has a
WPS tab that guides user through WPS registration with automatic AP
selection. In addition, it shows how WPS can be started manually by
selecting an AP from scan results.
+
+
+Credential processing
+---------------------
+
+By default, wpa_supplicant processes received credentials and updates
+its configuration internally. However, it is possible to
+control these operations from external programs, if desired.
+
+This internal processing can be disabled with wps_cred_processing=1
+option. When this is used, an external program is responsible for
+processing the credential attributes and updating wpa_supplicant
+configuration based on them.
+
+Following control interface messages are sent out for external programs:
+
+WPS-CRED-RECEIVED <hexdump of Credential attribute(s)>
+For example:
+<2>WPS-CRED-RECEIVED 100e006f10260001011045000c6a6b6d2d7770732d74657374100300020020100f000200081027004030653462303435366332363666653064333961643135353461316634626637313234333761636664623766333939653534663166316230323061643434386235102000060266a0ee1727