path: root/wpa_supplicant/config_ssid.h
diff options
authorJouni Malinen <j@w1.fi>2012-11-24 20:21:29 (GMT)
committerJouni Malinen <j@w1.fi>2012-11-24 20:21:29 (GMT)
commit62d498033109e4fff00f6913bfd83f5d01ad2b14 (patch)
treed61a9cd712a5f2700e2502f369f78c6e48f9f891 /wpa_supplicant/config_ssid.h
parent368b1957a61bd0c2932c7532660dff770960047c (diff)
Allow PMF to be enabled by default
Previously, PMF (protected management frames, IEEE 802.11w) could be enabled only with a per-network parameter (ieee80211w). The new global parameter (pmf) can now be used to change the default behavior to be PMF enabled (pmf=1) or required (pmf=2) for network blocks that do not override this with the ieee80211w parameter. Signed-hostap: Jouni Malinen <j@w1.fi>
Diffstat (limited to 'wpa_supplicant/config_ssid.h')
1 files changed, 6 insertions, 0 deletions
diff --git a/wpa_supplicant/config_ssid.h b/wpa_supplicant/config_ssid.h
index 99f3766..a9a477a 100644
--- a/wpa_supplicant/config_ssid.h
+++ b/wpa_supplicant/config_ssid.h
@@ -361,6 +361,12 @@ struct wpa_ssid {
* This value is used to configure policy for management frame
* protection (IEEE 802.11w). 0 = disabled, 1 = optional, 2 = required.
+ * This is disabled by default unless the default value has been changed
+ * with the global pmf=1/2 parameter.
+ *
+ * Internally, special value 3 is used to indicate that the parameter
+ * was not specified in the configuration (i.e., default behavior is
+ * followed).
enum mfp_options ieee80211w;
#endif /* CONFIG_IEEE80211W */