aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJouni Malinen <j@w1.fi>2013-11-02 14:01:32 (GMT)
committerJouni Malinen <j@w1.fi>2013-11-02 14:01:32 (GMT)
commit65015b2d8eb7f067f672c6fcc78fa8c87645e682 (patch)
treed7427741aa421ddc68d163533df07e895c6e3d6a
parentbafd8bfa577af8bf19ab2391e2943aafab3fa891 (diff)
downloadhostap-65015b2d8eb7f067f672c6fcc78fa8c87645e682.zip
hostap-65015b2d8eb7f067f672c6fcc78fa8c87645e682.tar.gz
hostap-65015b2d8eb7f067f672c6fcc78fa8c87645e682.tar.bz2
Replace unnecessary UTF-8 characters with ASCII versions
There is no need for using UTF-8 in these files when perfectly fine ASCII versions of these characters exist. Signed-hostap: Jouni Malinen <j@w1.fi>
-rw-r--r--wpa_supplicant/android.config2
-rw-r--r--wpa_supplicant/ctrl_iface.c2
-rw-r--r--wpa_supplicant/defconfig2
-rw-r--r--wpa_supplicant/wpa_supplicant.conf10
4 files changed, 8 insertions, 8 deletions
diff --git a/wpa_supplicant/android.config b/wpa_supplicant/android.config
index 6686422..4077a65 100644
--- a/wpa_supplicant/android.config
+++ b/wpa_supplicant/android.config
@@ -514,7 +514,7 @@ CONFIG_TDLS=y
# Autoscan
# This can be used to enable automatic scan support in wpa_supplicant.
-# See wpa_supplicant.conf for more information on autoscan usage.
+# See wpa_supplicant.conf for more information on autoscan usage.
#
# Enabling directly a module will enable autoscan support.
# For exponential module:
diff --git a/wpa_supplicant/ctrl_iface.c b/wpa_supplicant/ctrl_iface.c
index 801399f..87d711e 100644
--- a/wpa_supplicant/ctrl_iface.c
+++ b/wpa_supplicant/ctrl_iface.c
@@ -181,7 +181,7 @@ static int set_disallow_aps(struct wpa_supplicant *wpa_s, char *val)
struct wpa_ssid *c;
/*
- * disallow_list ::= <ssid_spec> | <bssid_spec> | <disallow_list> | “”
+ * disallow_list ::= <ssid_spec> | <bssid_spec> | <disallow_list> | ""
* SSID_SPEC ::= ssid <SSID_HEX>
* BSSID_SPEC ::= bssid <BSSID_HEX>
*/
diff --git a/wpa_supplicant/defconfig b/wpa_supplicant/defconfig
index 98fa30f..409c603 100644
--- a/wpa_supplicant/defconfig
+++ b/wpa_supplicant/defconfig
@@ -521,7 +521,7 @@ CONFIG_PEERKEY=y
# Autoscan
# This can be used to enable automatic scan support in wpa_supplicant.
-# See wpa_supplicant.conf for more information on autoscan usage.
+# See wpa_supplicant.conf for more information on autoscan usage.
#
# Enabling directly a module will enable autoscan support.
# For exponential module:
diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index 6414f44..11be8dd 100644
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -241,14 +241,14 @@ fast_reauth=1
# This is an optional set of parameters for automatic scanning
# within an interface in following format:
#autoscan=<autoscan module name>:<module parameters>
-# autoscan is like bgscan but on disconnected or inactive state.
-# For instance, on exponential module parameters would be <base>:<limit>
+# autoscan is like bgscan but on disconnected or inactive state.
+# For instance, on exponential module parameters would be <base>:<limit>
#autoscan=exponential:3:300
# Which means a delay between scans on a base exponential of 3,
-# up to the limit of 300 seconds (3, 9, 27 ... 300)
-# For periodic module, parameters would be <fixed interval>
+# up to the limit of 300 seconds (3, 9, 27 ... 300)
+# For periodic module, parameters would be <fixed interval>
#autoscan=periodic:30
-# So a delay of 30 seconds will be applied between each scan
+# So a delay of 30 seconds will be applied between each scan
# filter_ssids - SSID-based scan result filtering
# 0 = do not filter scan results (default)