path: root/hostapd/hostapd.conf
diff options
Diffstat (limited to 'hostapd/hostapd.conf')
1 files changed, 27 insertions, 0 deletions
diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index 82c32c2..33dd696 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -77,6 +77,33 @@ ctrl_interface_group=0
# SSID to be used in IEEE 802.11 management frames
+# Country code (ISO/IEC 3166-1). Used to set regulatory domain.
+# Modify as needed to indicate country in which device is operating.
+# This can limit available channels and transmit power.
+# (default: US)
+# Enable IEEE 802.11d. This advertises the country_code and the set of allowed
+# channels and transmit power levels based on the regulatory limits. The
+# country_code setting must be configured with the correct country for
+# IEEE 802.11d functions.
+# (default: 0 = disabled)
+# Enable IEEE 802.11h. This enables the TPC and DFS services when operating
+# in a regulatory domain which requires them. Once enabled it will be
+# operational only when working in hw_mode a and in countries where it is
+# required. The end user should not be allowed to disable this.
+# The country_code setting must be configured with the correct country for
+# IEEE 802.11h to function.
+# When IEEE 802.11h is operational, the channel_policy and configured channel
+# settings will be ignored but will behave as though the channel_policy is
+# set to "3" (automatic channel selection). When IEEE 802.11h is enabled but
+# not operational (for example, if the radio mode is changed from "a" to "b")
+# the channel_policy and channel settings take effect again.
+# (default: 1 = enabled)
# Operation mode (a = IEEE 802.11a, b = IEEE 802.11b, g = IEEE 802.11g,
# Default: IEEE 802.11b