Re: Senao NL-2511CD + PCMCIA / PCI Adapter TI 1410 --> hfa384x_cmd - timeout - reg=0xffff


From: Christian Zoffoli (czoffoli_at_xmerlin.org)
Date: 2002-09-30 17:16:55 UTC


Hi.

Now my TI1410 adapter works fine with the senao card :))

here is my config.opts (I've found the right ports and memory addresses booting with a win hd).

The previous error "hfa384x_cmd dissappeared" :)))



include port 0xcc00-0xccff
include port 0xc000-0xc0ff

include memory 0xc0000-0xfffff

include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff

include memory 0xbe5fe000-0xbe5fefff
include memory 0xbe5fd000-0xbe5fdfff
include memory 0xbddfd000-0xbe5fcfff

#include memory 0xbe5ff000-0xbe5fffff

...


I hope this will be usefull to someone.

Regards,
Christian

Edson Roberto Schmidt ha scritto:
> Hi Christian,
>
> Sorry by the delay, but I saw your messages only now.
>
> I´m currently use two senao nl2511cd ext2 plus with 2 ricoh adapters and
> all seems to work fine.
>
> I´m using the folowing firmware version from senao, the only that work
> for me.
>
>

http://www.senao.com/service%20&%20support/drives/Firmwares/2511cd_frm100.zip

>

<http://www.senao.com/service%20&%20support/drives/Firmwares/2511cd_frm100.zip>
>
> here my syslog report.
>

[cut]



This archive was generated by hypermail 2.1.4.