From: Andrew McCall (andrew.mccall_at_goroam.net)
Date: 2002-09-05 15:00:45 UTC
The card I'm using is an Actiontec wlan adapter only. It was purchased directly from an Actiontec UK distributer.
It shows up in /proc/pci, but the hostap driver cant find it when I modprobe.
Bus 0, device 16, function 0:
Network controller: PCI device 1260:3873 (Harris Semiconductor) (rev 1).
IRQ 10. Master Capable. Latency=60. Prefetchable 32 bit memory at 0xa0000000 [0xa0000fff].
Jim Thompson wrote:
> On Wednesday, September 4, 2002, at 02:30 PM, Terry Schmidt wrote:
>> There is probably two version of this card. One with the 56k modem,
>> and one
>> without the 56k modem.
> Actiontec builds both. The modem is a softmodem (Lucent/Agere).
> IBM also OEMs the Cisco AIR350 card, so Cisco can drive 'LEAP'.
> 'hostap' doesn't work
> with this card (obviously?)