look strange tx rate on my board!!!!


From: 조대우 (daewoois_at_samsung.net)
Date: 2002-08-22 06:20:21 UTC



hi all!
I am making a board for hostap!!
Main processor is the MPC 855T, and my board has a PCMCIA slot for WLAN PCMCIA Card. However, the tx rate of my board is something wrong.

external ftp server ---(100M Ethernet)---> my board ---(wireless)---> ftp client(notebook) At this environment, download rate is 300Kbytes/sec

ftp client(notebook) ---(wireless)---> my board ---(100M Ethernet)---> external ftp server At this environment, upload rate is 600Kbytes/sec

The consol of my board say no error report......

someone help....me.....

====================< this is my boot message >===================================
Boot 1.1.5 (Jun 24 2002 - 20:16:01)

CPU: XPC855xxZPnnD4 at 48 MHz: 4 kB I-Cache 4 kB D-Cache FEC present Board: SAIT855
DRAM: 16 MB
FLASH: 4 MB
In: serial

Out:   serial
Err:   serial
DOC:   No DiskOnChip found

Hit any key to stop autoboot: 0
## Booting image at ffc40000 ...

Image Name: Linux kernel 2.4.12-sait855_wave Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 578662 Bytes = 565 kB = 0 MB Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ffd00000 ...
Image Name: wireless LAN initrd image for WE Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 2929981 Bytes = 2861 kB = 2 MB Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 00cd3000, end 00f9e53d ... OK Linux version 2.4.18 (root_at_localhost.localdomain) (gcc version 2.95.3 20010315 (release/MontaVista)) #23 Tue Aug 20 15:30:32 KST 2002 On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.

Kernel command line: root=/dev/ram rw
Decrementer Frequency = 180000000/60
Warning: real time clock seems stuck!
Calibrating delay loop... 47.82 BogoMIPS Memory: 11720k available (1084k kernel code, 380k data, 48k init, 0k highmem) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket
Starting kswapd
JFFS version 1.0, (C) 1999, 2000 Axis Communications AB CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize eth0: FEC ENET Version 0.2, FEC irq 3, addr 00:11:22:33:44:94 loop: loaded (max 8 devices)
physmap flash device: 400000 at ffc00000  Amd/Fujitsu Extended Query Table v1.1 at 0x0040  number of CFI chips: 1
 Using command line partition definition  Creating 2 MTD partitions on "Physically mapped flash":  0x00000000-0x00380000 : "ppcboot + kernel+initrd"  0x00380000-0x00400000 : "etc_jffs"
 NET4: Linux TCP/IP 1.0 for NET4.0
 IP Protocols: ICMP, UDP, TCP, IGMP
 IP: routing cache hash table of 512 buckets, 4Kbytes  TCP: Hash tables configured (established 1024 bind 1024)  NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.  NET4: Ethernet Bridge 008 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0
RAMDISK: Compressed image found at block 0 Freeing initrd memory: 2861k freed
EXT2-fs warning: maximal mount count reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 48k init
INIT: version 2.78 booting
warning: can't open /etc/fstab: No such file or directory Starting PCMCIA services: Using /lib/modules/2.4.18/pcmcia/pcmcia_core.o   

    urce in use
 Using /lib/modules/2.4.18/pcmcia/m8xx_pcmcia.o  m8xx_pcmcia:
 m8xx_pcmcia: SAIT855 using SLOT_A with IRQ 13.  Using /lib/modules/2.4.18/pcmcia/ds.o

 done.
 cardmgr[40]: starting, version is 3.1.29  PCMCIA: Please wait until PCMCIA sattled...

 cardmgr[40]: config error, file 'config' line 1136: unknown device: hostap_cs
 cardmgr[40]: config error, file './pcmcia.conf' line 1: syntax error
 cardmgr[40]: watching 1 sockets
 cardmgr[40]: socket 0: Samsung SWL2000-N 11Mb/s WLAN Card
 cardmgr[40]: executing: 'modprobe hostap_cs channel=1 iw_mode=3 essid=hahaha ignore_cis_vcc=0'
 hostap_cs: prism2.c 331 line --> hfa384x_cmd - timeout - reg=0x%04x, flag=0x%lx

 hostap_cs: (c) SSH Communications Security Corp <jkm_at_ssh.com>  cardmgr[40]: + Using /lib/modules/2.4.18/pcmcia/hostap_cs.o  daewoois : link->conf.Attributes ==> 0x1  daewoois:prism2_interrupt enable

 daewoois : dev->irq ==> 0x9, dev->base_addr ==> 0x100
 hostap_cs: index 0x01: Vcc 5.0, irq 9, io 0x0100-0x013f
 hostap_cs: Registered netdevice wlan0
 daewoois : prism2_hw_init()
 daewoois : prism2_hw_config: initialized in 11229 iterations
 wlan0: NIC: id=0x8002 v1.0.1

 wlan0: PRI: id=0x15 v0.3.0
 wlan0: STA: id=0x1f v0.8.3
 cardmgr[40]: executing: './network start wlan0'  eth0: Promiscuous mode enabled.
 device eth0 entered promiscuous mode
 device wlan0 entered promiscuous mode
 eth0: Promiscuous mode enabled.
 br0: port 2(wlan0) entering listening state  br0: port 1(eth0) entering listening state  sh-2.04# br0: port 2(wlan0) entering learning state  br0: port 1(eth0) entering learning state

 sh-2.04# iwconfig wlan0
 wlan0 IEEE 802.11-DS ESSID:"hahaha"

    Mode:Master Frequency:2.412GHz Access Point: 00:02:78:E1:B5:A3     Tx-Power:10 dBm Sensitivity=1/3
    Retry min limit:8 RTS thr:off Fragment thr:off     Encryption key:off
    Power Management:off
    Link Quality:0 Signal level:0 Noise level:0     Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0     Tx excessive retries:0 Invalid misc:0 Missed beacon:0

sh-2.04# br0: port 2(wlan0) entering forwarding state

br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
br0: topology change detected, propagating
                     


This archive was generated by hypermail 2.1.4.