ds? and promiscousmode error! in c11idt.

From: Quintawifi1 (quintawifi1_at_eresmas.com)
Date: 2002-08-01 12:18:53 UTC

Hi! i have finished configuring my card with orinoco_cs or hostap_cs. But i still don't know some points.
What is the module ds??i'm not able to uninstall it, and in other configs you have sent me you don't have it.

Module                  Size  Used by    Not tainted
nls_cp437               4384   2  (autoclean)
orinoco_cs              4712   2 
orinoco                29568   0  [orinoco_cs]
hermes                  3296   0  [orinoco_cs orinoco]
ds                      6624   1  [orinoco_cs]
i82365                 22416   1 
pcmcia_core            41408   0  [orinoco_cs ds i82365]
keybdev                 1664   0  (unused)
usbkbd                  2848   0  (unused)
input                   3072   0  [keybdev usbkbd]
usb-ohci               17472   0  (unused)
usbcore                48032   0  [usbkbd usb-ohci]

And the card is still giving some errors, like this: How do i solve the mentioned promiscous error?


ds: no socket drivers loaded!
unloading PCMCIA Card Services
eth0: Setting half-duplex based on auto-negotiated partner ability 0000. Linux PCMCIA Card Services 3.1.33
  kernel build: 2.4.18-bf2.4 unknown
  options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Enabling device 00:08.0 (0000 -> 0002) AMD756: dev 1180:0475, router pirq : 1 get irq : 0 AMD756: dev 1180:0475, router pirq : 1 SET irq : 5 PCI: Assigned IRQ 5 for device 00:08.0
  Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:08, mem 0x10000000     host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 5] [lat 168/176] [bus 2/5]

    ISA irqs (default) = 3,4,5,7,12 PCI status changes cs: memory probe 0xa0000000-0xa0ffffff: clean. hermes.c: 16 Jan 2002 David Gibson <hermes_at_gibson.dropbear.id.au> orinoco.c 0.09b (David Gibson <hermes_at_gibson.dropbear.id.au> and others) orinoco_cs.c 0.09b (David Gibson <hermes_at_gibson.dropbear.id.au> and others)
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7

cs: IO port probe 0x0380-0x03bf: clean.
cs: IO port probe 0x03e0-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
eth1: Station identity 001f:0003:0000:0008
eth1: Looks like an Intersil firmware version 0.08
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:50:C2:01:9B:E1
eth1: Station name "Prism  I"
eth1: ready
eth1: index 0x01: Vcc 3.3, irq 3, io 0x0100-0x013f
eth1: Error -110 setting PROMISCUOUSMODE to 1.
eth1: Error -110 setting PROMISCUOUSMODE to 1. eth1: Error -110 setting PROMISCUOUSMODE to 1.


Thanks a lot for your help.

Bye and regards from Spain!!


This archive was generated by hypermail 2.1.4.