installing conceptronic c11idt


From: Quintawifi1 (quintawifi1_at_eresmas.com)
Date: 2002-07-31 13:17:06 UTC


Hi from Madrid!

I have bought some c11idt conceptronic cards with prism2 , in order to convert them in AP.

But i'm not able to install them as normal managed client,in my "woody" with kernel 2.4.18.
The card uses orinoco_cs driver and i8235 cardbus support.

i have tried different options bt i'm not able to make the card work.

Maybe you can help me, i send you my lspci, lsmod and dmesg outputs:


Module                  Size  Used by    Not tainted
orinoco_cs              4712   0  (unused)
ds                      6624   1  [orinoco_cs]
i82365                 22416   1 
pcmcia_core            41408   0  [orinoco_cs ds i82365]
orinoco                29568   0  [orinoco_cs]
hermes                  3296   0  [orinoco_cs orinoco]
keybdev                 1664   0  (unused)
usbkbd                  2848   0  (unused)
input                   3072   0  [keybdev usbkbd]
usb-ohci               17472   0  (unused)
usbcore                48032   0  [usbkbd usb-ohci]

------------------------------------

00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 23)
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge (rev 01)
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA
(rev 01)

00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE
(rev 03)

00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03)
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB (rev 06)
00:08.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80) 00:09.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11)
00:09.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11) 00:0a.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev 10)

01:05.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP
(rev 04)


Linux version 2.4.18-bf2.4 (root_at_zombie) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002
BIOS-provided physical RAM map:

 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
 BIOS-e820: 0000000007ff0000 - 0000000007ff8000 (ACPI data)
 BIOS-e820: 0000000007ff8000 - 0000000008000000 (ACPI NVS)  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.

No local APIC present or hardware disabled Kernel command line: auto BOOT_IMAGE=Linux ro root=302 Initializing CPU#0
Detected 555.478 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1107.55 BogoMIPS Memory: 125616k/131008k available (1783k kernel code, 5004k reserved, 549k data, 280k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0081f9ff c0c1f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After vendor init, caps: 0081f9ff c0c1f9ff 00000000 00000000
Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0081f9ff c0c1f9ff 00000000 00000000
CPU:             Common caps: 0081f9ff c0c1f9ff 00000000 00000000
CPU: AMD-K7(tm) Processor stepping 02

Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch_at_atnf.csiro.au) mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router AMD756 VIPER [1022/740b] at 00:07.3
AMD756: dev 1180:0475, router pirq : 1 get irq : 0 Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7409: IDE controller on PCI bus 00 dev 39
AMD7409: chipset revision 3
AMD7409: not 100% native mode: will probe irqs later
AMD7409: disabling single-word DMA support (revision < C4)

    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio

hda: ST320011A, ATA DISK drive
hdb: QUANTUM FIREBALLlct08 13, ATA DISK drive
hdc: SAMSUNG CD-ROM SC-152L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63, UDMA
(33)

hdb: 25429824 sectors (13020 MB) w/418KiB Cache, CHS=1582/255/63, UDMA
(33)

hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >  hdb: hdb1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Loading I2O Core - (c) Copyright 1999 Red Hat Software I2O configuration manager v 0.04.
  (C) Copyright 1999 Red Hat Software
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.4.5)
8139cp 10/100 PCI Ethernet driver v0.0.6 (Nov 19, 2001) 8139cp: pci dev 00:0b.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.24
AMD756: dev 10ec:8139, router pirq : 4 get irq : 10 PCI: Found IRQ 10 for device 00:0b.0
PCI: Sharing IRQ 10 with 00:07.4
eth0: RealTek RTL8139 Fast Ethernet at 0xc881af00, 00:c0:df:0e:79:8c, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C' HDLC support module revision 1.02 for Linux 2.4 Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.97.sv
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found Highpoint HPT370 Softwareraid driver for linux version 0.01 No raid array found
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, Apr 14 2002 DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.016. 3w-xxxx: No cards with valid units found. request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted i2o_scsi.c: Version 0.0.1
  chain_pool: 0 bytes @ c1276360
  (512 byte buffers X 4 can_queue X 0 i2o controllers) NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 280k freed Adding Swap: 393584k swap-space (priority -1) usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
AMD756: dev 1022:740c, router pirq : 4 get irq : 10 PCI: Found IRQ 10 for device 00:07.4
PCI: Sharing IRQ 10 with 00:0b.0
usb-ohci.c: USB OHCI at membase 0xc8861000, IRQ 10 usb-ohci.c: usb-00:07.4, Advanced Micro Devices [AMD] AMD-756 [Viper] USB
usb-ohci.c: AMD756 erratum 4 workaround
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver keyboard

usbkbd.c: :USB HID Boot Protocol keyboard driver hermes.c: 16 Jan 2002 David Gibson <hermes_at_gibson.dropbear.id.au> orinoco.c 0.09b (David Gibson <hermes_at_gibson.dropbear.id.au> and others) Linux PCMCIA Card Services 3.1.33
  kernel build: 2.4.18-bf2.4 unknown
  options: [pci] [cardbus] [apm]
ds: no socket drivers loaded!
unloading PCMCIA Card Services
Linux PCMCIA Card Services 3.1.33
  kernel build: 2.4.18-bf2.4 unknown
  options: [pci] [cardbus] [apm]
ds: no socket drivers loaded!
unloading PCMCIA Card Services
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended eth0: Setting half-duplex based on auto-negotiated partner ability 0000. Linux PCMCIA Card Services 3.1.33
  kernel build: 2.4.18-bf2.4 unknown
  options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Enabling device 00:08.0 (0000 -> 0002) AMD756: dev 1180:0475, router pirq : 1 get irq : 0 AMD756: dev 1180:0475, router pirq : 1 SET irq : 5 PCI: Assigned IRQ 5 for device 00:08.0
  Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:08, mem 0x10000000     host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 5] [lat 168/176] [bus 2/5]

    ISA irqs (default) = 3,4,5,7,12 PCI status changes cs: memory probe 0xa0000000-0xa0ffffff: clean. orinoco_cs.c 0.09b (David Gibson <hermes_at_gibson.dropbear.id.au> and others)
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7

cs: IO port probe 0x0380-0x03bf: clean.
cs: IO port probe 0x03e0-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
eth1: Station identity 001f:0003:0000:0008
eth1: Looks like an Intersil firmware version 0.08
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:50:C2:01:9B:E1
eth1: Station name "Prism  I"

eth1: ready
eth1: index 0x01: Vcc 3.3, irq 3, io 0x0100-0x013f
VFS: Disk change detected on device fd(2,0)
floppy0: data CRC error: track 1, head 0, sector 14, size 2
floppy0: data CRC error: track 1, head 0, sector 14, size 2
end_request: I/O error, dev 02:00 (floppy), sector 49 VFS: Disk change detected on device fd(2,0) VFS: busy inodes on changed media.
floppy0: data CRC error: track 1, head 0, sector 14, size 2 floppy0: data CRC error: track 1, head 0, sector 14, size 2 end_request: I/O error, dev 02:00 (floppy), sector 49

This archive was generated by hypermail 2.1.4.