From: Jouni Malinen (
Date: 2002-07-26 10:30:24 UTC

On Mon, Jul 08, 2002 at 10:11:36PM -0400, Jason Boxman wrote:

> I mentioned this the first time, but no one acknowledged my post, and it
> seems important, so here it is again:
> wlan0 hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res =- 110)
> hostap_pci: wlan0: resetting card
> **
> box hangs

Does this still happen with the latest CVS version?

> I'm bridging wlan0 with eth2, a regular Netgear FA PCI card. I didn't
> experience this behavior during the time I used hostap without bridging.
> I have WEP disabled. I was copying a large file. Death was abrupt and
> almost immediate. Actually, the last thing I did was scan for APs on my
> WPC11v3 and, while connected to the hostap card, proceeded to connect to
> another AP. Then death.

Hmm.. Did I understood correctly? The host that crashed was using Host AP driver with bridging. There was heavy traffic between the AP (using Host AP) and the station that started scanning for APs. When the station was about to re-associate (while still copying the file?) with another AP, the AP (with Host AP) crashed. (?)

Jouni Malinen                                            PGP id EFC895FA

This archive was generated by hypermail 2.1.4.