HOSTAP/NOCAT DWL-650 Issue


From: Jason Price (wireless_at_inetica.com)
Date: 2002-07-04 20:49:33 UTC



Hello all:
having some major issues on my DWL-650 runing hostap_cs and nocat when i test the link on my Ipaq (lucent silver card) the sniffer shows the ap switching between the following mac address: 00:05:5D:F1:2F:7C and FF:FF:FF:FF:FF:FF also i am losing about 50% 75% of all my data.. any clues on what could be configed wrong ? loosing about 10 outta 15 packets, any help would be great. also when i run netstumbler on the Ap i only see it come up once every 1 - 2 min.

Thanks
Jason

CARD D-link DWL-650

hostap_cs: hostap_cs.c 0.0.0 2002-05-19 (SSH Communications Security Corp, Jouni Malinen)
hostap_cs: index 0x01: Vcc 5.0, irq 4, io 0x0100-0x013f
hostap_cs: Registered netdevice wlan0


wlan0     Link encap:Ethernet  HWaddr 00:05:5D:F1:2F:7C  
          inet addr:192.168.5.1  Bcast:192.168.5.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:23 errors:0 dropped:945 overruns:0 frame:0
          TX packets:37 errors:9 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:1509 (1.4 Kb)  TX bytes:2208 (2.1 Kb)
          Interrupt:4 Base address:0x100 


wlan0     IEEE 802.11-DS  ESSID:"TESTNODE"  Nickname:"darkstar"
          Mode:Master  Frequency:2.422GHz  Access Point: 00:05:5D:F1:2F:7C
          Bit Rate:2Mb/s   Tx-Power:4 dBm   Sensitivity=1/3  
          Retry min limit:8   RTS thr=500 B   Fragment thr=1000 B   
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:330143  Invalid misc:69271   Missed beacon:0
cat debug
next_txfid=4 next_alloc=4
FID: tx=0101 intransmit=FFFF
FID: tx=0116 intransmit=FFFF
FID: tx=012B intransmit=FFFF
FID: tx=0140 intransmit=FFFF
FID: tx=0155 intransmit=FFFF
FID: tx=016A intransmit=FFFF
FID: tx=017F intransmit=FFFF
FID: tx=0194 intransmit=FFFF

FW TX rate control: 0
beacon_int=50
dtim_period=1
wds_max_connections=16
dev_enabled=1
-

cat 00\:02\:2d\:1e\:cd\:50
STA=00:02:2d:1e:cd:50
users=0
aid=1
flags=0x0007 AUTH ASSOC PS
capability=0x01
listen_interval=2
supported_rates=1Mbps 2Mbps 5.5Mbps 11Mbps jiffies=198636
last_auth=147481
last_assoc=147482
last_rx=187732
last_tx=0
rx_packets=15
tx_packets=0

rx_bytes=2940
tx_bytes=0
buffer_count=0
last_rx: silence=0 signal=183 rate=20 flow=0 tx_rate=110
tx[1M]=0
tx[2M]=0
tx[5.5M]=0
tx[11M]=0
rx[1M]=0
rx[2M]=688
rx[5.5M]=0
rx[11M]=15

-

cat ap_debug
BridgedUnicastFrames=0
BridgedMulticastFrames=16
max_inactivity=300
bridge_packets=1
nullfunc_ack=1
autom_ap_wds=0
auth_algs=3
-

cat stats
TxUnicastFrames=463
TxMulticastframes=2
TxFragments=9566
TxUnicastOctets=43522
TxMulticastOctets=728
TxDeferredTransmissions=1455
TxSingleRetryFrames=16
TxMultipleRetryFrames=0
TxRetryLimitExceeded=339
TxDiscards=0
RxUnicastFrames=1018
RxMulticastFrames=38
RxFragments=1056
RxUnicastOctets=59918
RxMulticastOctets=1672
RxFCSErrors=11
RxDiscardsNoBuffer=0
TxDiscardsWrongSA=0
RxDiscardsWEPUndecryptable=0
RxMessageInMsgFragments=0
RxMessageInBadMsgFragments=0

DMESG:
wlan0: TXEXC - fid=0x03ba - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=0 fc=0x08a0 (Mgmt::10)    addr1=00:02:2d:1e:cd:50 addr2=00:05:5d:f1:2f:7c addr3=00:05:5d:f1:2f:7c

wlan0: STA 00:02:2d:1e:cd:50 TX rate lowered to 20
wlan0: sending deauthentication info to STA 00:02:2d:1e:cd:50(last=3092121, jiffies=3122321)
wlan0: TXEXC - fid=0x05c2 - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=0 fc=0x08c0 (Mgmt::12)    addr1=00:02:2d:1e:cd:50 addr2=00:05:5d:f1:2f:7c addr3=00:05:5d:f1:2f:7c Could not find STA for this TX error



This archive was generated by hypermail 2.1.4.