Re: Fw: CMDCODE_ACCESS_WRITE failed...


From: wayne (wayne_at_its.noneofyour.info)
Date: 2002-06-10 02:46:23 UTC



I am also getting this error with a D-Link DWL-520 (DWL-650 in a PCI/Cardbus adapter). I run kernel 2.4.18.

I applied the patch mentioned and the output of dmesg is (apologies for the length but I wasn't sure what to exclude):

hostap_cs: hostap_cs.c 0.0.0 2002-05-19 (SSH Communications Security Corp, Jouni Malinen)

hostap_cs: (c) SSH Communications Security Corp <jkm_at_ssh.com>
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
prism2_config()
hostap_cs: setting Vcc=33 (from config)
CISTPL_MANFID: 0x0156, 0x0002

Lucent-based card
Checking CFTABLE_ENTRY 0x01 (default 0x01) IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: index 0x01: Vcc 3.3, irq 12, io 0x0100-0x013f
hostap_cs: Registered netdevice wlan0
prism2_hw_init()
prism2_hw_config: initialized in 16939 iterations
wlan0: NIC: id=0x800c v1.0.0
wlan0: PRI: id=0x15 v1.0.7

wlan0: STA: id=0x1f v1.3.5
wlan0: INFO - fid=0x01df - len=2 type=0xf200   LinkStatus=2 (Disconnected)
wlan0: INFO - fid=0x01e0 - len=2 type=0xf200   LinkStatus=2 (Disconnected)
wlan0: INFO - fid=0x01e1 - len=2 type=0xf200   LinkStatus=2 (Disconnected)
wlan0: INFO - fid=0x01e2 - len=2 type=0xf200   LinkStatus=2 (Disconnected)
wlan0: prism2_open
wlan0: authentication: 00:05:5d:ee:50:75 len=6, auth_alg=0, auth_transaction=1, status_code=0, fc=0x00b0 wlan0: new STA 00:05:5d:ee:50:75
wlan0: association request: from 00:05:5d:ee:50:75 to 00:05:5d:ee:50:50 len=16
  capability=0x0011, listen_interval=1 - new AID 1 wlan0: TXEXC - fid=0x0200 - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: STA 00:05:5d:ee:50:75 TX rate lowered to 55 wlan0: TXEXC - fid=0x013c - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x01f5 - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x0182 - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x026d - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x032b - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x03bc - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x029a - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x0131 - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x0207 - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x0154 - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x01fe - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x03ad - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x023e - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: TXEXC - fid=0x02c8 - status=0x0001 ([RetryErr]) tx_control=000c

   retry_count=0 tx_rate=110 fc=0x0a08 (Data::0)    addr1=00:05:5d:ee:50:75 addr2=00:05:5d:ee:50:50 addr3=00:05:5d:ee:50:50 wlan0: timeout on waiting pending transmit command.. wlan0: handle_pspoll - to BAP0 failed
hfa384x_cmd: timeout on waiting pending TX wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110, rid=fc40, len=2)

hostap_cs: wlan0: resetting card
prism2_pccard_cor_sreset: original COR 41
prism2_hw_init()
prism2_hw_config: initialized in 17197 iterations
TIM AID 1 setting (set=0) failed
NETDEV WATCHDOG: wlan0: transmit timed out hostap_cs: wlan0 Tx timed out! Resetting card wlan0: CMD=0001 EVSTAT=8000 OFFSET0=0000 OFFSET1=0000 SWSUPPORT0=8a32
hostap_cs: wlan0: resetting card
prism2_pccard_cor_sreset: original COR 41
prism2_hw_init()
prism2_hw_config: initialized in 17204 iterations
prism2_tx_timeout: wake up queue

wlan0: STA 00:05:5d:ee:50:75 TX rate raised to 110

Thanks for your time.

Wayne



This archive was generated by hypermail 2.1.4.