aboutsummaryrefslogtreecommitdiffstats
path: root/wpa_supplicant/wpa_supplicant.c
Commit message (Expand)AuthorAgeFilesLines
* STA: Allow PTK rekeying without Ext KeyID to be disabled as a workaroundAlexander Wetzel13 hours1-1/+25
* Fix VERSION_STR printf() calls in case the postfix strings include %Didier Raboud6 days1-1/+1
* HT: Remove SMPS in AP modeJouni Malinen8 days1-1/+0
* Check for FT support when selecting FT suitesMatthew Wang14 days1-0/+5
* SAE: Special test mode sae_pwe=3 for looping with password identifierJouni Malinen14 days1-2/+3
* Enhance get_mode() to return correct hw_mode with 6 GHz supportVamsi Krishna2020-01-231-3/+8
* SAE: Use H2E whenever Password Identifier is usedJouni Malinen2020-01-211-3/+6
* Introduce and add key_flagAlexander Wetzel2020-01-091-4/+8
* Test functionality to override driver reported signal levelsJouni Malinen2020-01-021-0/+102
* Maintain BSS entries for 5 seconds after interface is disabledJouni Malinen2020-01-021-0/+12
* wpa_supplicant: Do not disconnect on deinit if WoWLAN is enabledAlfonso Sánchez-Beato2019-12-301-4/+10
* Allow debug log to be written to both syslog and fileJouni Malinen2019-12-281-1/+1
* Use frequency in HT/VHT validation steps done before starting APAnkita Bajaj2019-12-201-2/+1
* SAE H2E: RSNXE override for testing purposesJouni Malinen2019-12-071-0/+15
* SAE H2E: Testing option to report extra rejected groupsJouni Malinen2019-12-061-8/+26
* SAE: Add RSNXE in Association Request and EAPOL-Key msg 2/4Jouni Malinen2019-10-171-0/+18
* FST: Update FST about MAC address changeDedy Lansky2019-10-151-0/+5
* SAE: Collect list of rejected groups for H2E in STAJouni Malinen2019-10-151-0/+8
* SAE: Derive H2E PT in STA before connectionJouni Malinen2019-10-151-1/+37
* RSN: Verify RSNXE match between Beacon/ProbeResp and EAPOL-Key msg 3/4Jouni Malinen2019-10-151-4/+9
* wpa_supplicant: Add support for EDMG channelsAlexei Avshalom Lazar2019-10-071-0/+177
* Add EDMG parameters to set_freq functionsAlexei Avshalom Lazar2019-10-071-1/+2
* MBO/OCE: Work around misbehaving MBO/OCE APs that use RSN without PMFVamsi Krishna2019-09-201-3/+7
* DPP2: Connection status result (Enrollee)Jouni Malinen2019-09-161-0/+5
* WPS: Update MAC address on address changesMikael Kanstrup2019-09-091-0/+1
* FILS: Update connect params after sending connection notificationAnkita Bajaj2019-09-081-1/+8
* Remove CONFIG_IEEE80211W build parameterJouni Malinen2019-09-081-25/+1
* EAP peer: Move certificate configuration params into shared structJouni Malinen2019-09-011-4/+4
* mesh: Do not enable HE on 5 GHz without VHTSven Eckelmann2019-08-301-2/+10
* OWE: Update connect params with new DH attributes to the driverSunil Dutt2019-08-161-0/+25
* RSN: Do not allow connection to proceed without MFPC=1 if PMF requiredJouni Malinen2019-08-161-0/+7
* Check for LEAP before doing FTMatthew Wang2019-08-111-2/+4
* nl80211: Use separate flag for 4-way handshake offloadArend van Spriel2019-08-011-1/+1
* Move MAC address randomization enable/disable to helper functionsEric Caruso2019-06-261-0/+63
* mesh: Add support for HE modeSven Eckelmann2019-06-231-2/+7
* wpa_supplicant: Fix type for ssid->mode comparisonsSven Eckelmann2019-06-231-2/+2
* WNM: Provide option to disable/enable BTM support in STAAnkita Bajaj2019-06-141-1/+5
* HE: Pass in HE information into hostapd_set_freq_params()John Crispin2019-05-271-2/+2
* HE: Remove VHT_ prefix from CHANWITDH_* defineJohn Crispin2019-05-271-9/+9
* FT: Allow PMKSA caching to be enabled with FT-EAPJouni Malinen2019-04-281-6/+8
* Replace int status/reason_code with u16 variableJouni Malinen2019-04-221-2/+2
* Add 802.11 reason code strings into wpa_supplicant messagesAlex Khouderchah2019-04-221-2/+4
* autoscan: Disable when we move above WPA_SCANNING stateWiktor Drewniak2019-04-151-1/+1
* SAE: Use open authentication to reassociate for PMKSA cachingSergey Matyukevich2019-04-151-1/+16
* scan: Use normal scans after connection failureIlan Peer2019-04-061-0/+3
* OWE: Fix a possible memory leak on error pathIlan Peer2019-04-061-1/+1
* MBO: Update connect params with new MBO attributes to driverAnkita Bajaj2019-04-051-0/+28
* Prefer FT-SAE over FT-PSK if both are enabledJouni Malinen2019-03-281-3/+5
* Add more debug prints on suite selector selectionJouni Malinen2019-03-281-0/+12
* Suite B: Prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192Jouni Malinen2019-03-271-13/+15