path: root/wpa_supplicant/mesh_mpm.c
Commit message (Collapse)AuthorAgeFilesLines
* mesh: Add support for HE modeSven Eckelmann2019-06-231-0/+32
| | | | | | | | | Mesh points can partially support HE features (when requiring no controlling STA/AP) as long as hardware supports it. The kernel just requires support for HE mesh and wpa_supplicant can forward the peer capabilities to the kernel for further processing. Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
* mesh: Fix random llid generation in an error caseJouni Malinen2019-04-151-1/+1
| | | | | | | | | If os_get_random() fails, llid must not be read/used since it could be uninitialized. Handle that special case by clearing llid explicitly to 0 to continue iteration. Fixes: 5f92659d88f1 ("mesh: Add mesh peering manager") Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
* OCV: Include and verify OCI in the AMPE handshakeMathy Vanhoef2018-12-171-0/+72
| | | | | | | | | Include and verify the OCI element in AMPE Open and Confirm frames. Note that the OCI element is included even if the other STA didn't advertise support of OCV. The OCI element is only required and verified if both peers support OCV. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
* Store the VHT Operation element of an associated STAMathy Vanhoef2018-12-161-0/+1
| | | | | | | | APs and mesh peers use the VHT Operation element to advertise certain channel properties (e.g., the bandwidth of the channel). Save this information element so we can later access this information. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
* mesh: Add Category and Action field to maximum buffer lengthJouni Malinen2018-11-241-1/+2
| | | | | | | | | Make the buf_len calculation match more closely with the following wpa_buf*() operations. The extra room from the existing elements was apparently sufficiently large to cover this, but better add the two octet header explicitly. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Fix off-by-one in buf length calculationBob Copeland2018-11-241-1/+1
| | | | | | | | | | | | | The maximum size of a Mesh Peering Management element in the case of an AMPE close frame is actually 24 bytes, not 23 bytes, plus the two bytes of the IE header (IEEE Std 802.11-2016, Found by inspection. The other buffer components seem to use large enough extra room in their allocations to avoid hitting issues with the full buffer size even without this fix. Signed-off-by: Bob Copeland <bobcopeland@fb.com>
* Silence new gcc warnings on switch statement fallthroughsJouni Malinen2018-05-151-1/+1
| | | | | | | Reword the comments to make gcc 8.1 recognize these as designed cases and not trigger implicit-fallthrough warnings. Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
* dbus: Add MeshPeerDisconnected signalSaurav Babu2017-09-091-0/+4
| | | | | | This is similar to the control interface event MESH-PEER-DISCONNECTED. Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
* dbus: Add MeshPeerConnected signalSaurav Babu2017-09-091-0/+4
| | | | | | This is similar to the control interface event MESH-PEER-CONNECTED. Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
* mesh: Use correct rate in HT and legacy mixed environmentMasashi Honma2017-02-191-1/+2
| | | | | | | | | | | | Let mesh STA A be a STA which has config disable_ht=1. Let mesh STA B be a STA which has config disable_ht=0. The mesh STA A and B was connected. Previously, the mesh STA A sent frame with HT rate even though its HT was disabled. This commit fixes the issue by checking the local BSS HT configuration. Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* mesh: Check remote peer HT Operation elementMasashi Honma2017-01-291-0/+14
| | | | | | | | | | | | | | | The remote mesh STA which had configuration disable_ht40=1 could have HT Capabilities element which includes Supported Channel Width Set = 1 (both 20 MHz and 40 MHz operation is supported) even though it had HT Operation element which includes STA Channel Width = 0 (20 MHz channel width only). Previously, local peer recognized such a remote peer as 40 MHz band width enabled STA because local peer only checked HT Capabilities element. This could cause disconnection between disable_ht40=1 mesh STA and disable_ht40=0 mesh STA. They could establish a mesh BSS but could not ping with ath9k_htc device. This commit fixes the issue by refering HT Operation element. Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* FILS: Extend wpa_auth_pmksa_get() to support PMKID matchingJouni Malinen2016-10-221-1/+1
| | | | | | This is needed for FILS processing to enable PMKSA caching. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
* hostapd: Use stations nsts capability in (Re)Association Response frameTamizh chelvam2016-09-051-1/+1
| | | | | | | | | | | | | | | Some deployed stations incorrectly consider nsts capability in (Re)Association Response frame as required capability instead of maximum capability and if it is greater than station's capability then beamform will not happen in uplink traffic. This commit adds support for an optional workaround to use station's nsts capability in (Re)Association Response frame if the station's nsts is less than AP by using the use_sta_nsts=1 configuration parameter. This configuration is introduced in this commit and it is disabled by default. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
* mesh: Report mesh peer AID to kernelMasashi Honma2016-07-231-2/+7
| | | | | | | | | Previously, mesh power management functionality works only with kernel MPM. Because user space MPM did not report mesh peer AID to kernel, the kernel could not identify the bit in TIM element. So this patch reports mesh peer AID to kernel. Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* mesh: Add debug prints on my/peer lid mismatchesJouni Malinen2016-06-281-3/+16
| | | | | | | This makes it easier to figure out why a received mesh peering frame could end up getting dropped. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Add MPM FSM transitions from ESTAB to HOLDING for {OPN,CNF}_RJCTJouni Malinen2016-06-281-0/+2
| | | | | | These events were missing from the MPM FSM state transition table. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Update MPM FSM events to match the standardJouni Malinen2016-06-281-20/+27
| | | | | | | | | {OPN,CNF,CLS}_IGNR events were removed during P802.11s draft development process. Replace these with not generating a MPM FSM event. In addition, add the standard REQ_RJCT event and option to pass in a specific reason code to mesh_mpm_fsm(). Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Rename MPM FSM states to match the standardJouni Malinen2016-06-281-16/+16
| | | | | | | | | | | During the P802.11s draft development, there were separate LISTEN and IDLE states. However, the current IEEE 802.11 standards uses only the IDLE state while the implementation called this LISTEN. Rename the state in the implementation to match the one used in the standard to avoid confusion. In addition, rename OPEN_{SENT,RCVD} to OPN_{SNT,RCVD} to match the exact spelling of these states in the standard. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Indicate OPN_RJCT event if AES-SIV decrypt failsJouni Malinen2016-06-281-7/+17
| | | | | | | | | REVmc/D6.0 (Processing Mesh Peering Open frames for AMPE) mandates the OPN_RJCT event to be invoked if AES-SIV decryption for received Mesh Peering Open frame fails. This allows a Mesh Peering Close frame to be sent in such a case. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Write close reason from Mesh Peering Close to debug logJouni Malinen2016-06-281-0/+4
| | | | | | | This makes it a bit easier to understand the debug log entries related to tearing down a mesh connection. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Use MESH_CAP_* macros for mesh capabilityMasashi Honma2016-06-191-1/+2
| | | | Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* mesh: Ignore crowded peerMasashi Honma2016-06-191-0/+8
| | | | | | | | The "Accepting Additional Mesh Peerings bit == 0" means the peer cannot accept any more peers, so suppress attempt to open a connection to such a peer. Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* mesh: Avoid use of hardcoded cipherJouni Malinen2016-06-191-12/+12
| | | | | | | | | This moves pairwise, group, and management group ciphers to various mesh data structures to avoid having to hardcode cipher in number of places through the code. While CCMP and BIP are still the hardcoded ciphers, these are now set only in one location. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Clean up AMPE element encoding and parsingJouni Malinen2016-06-191-3/+8
| | | | | | | | | | | | | The AMPE element includes number of optional and variable length fields and those cannot really be represented by a fixed struct ieee80211_ampe_ie. Remove the optional fields from the struct and build/parse these fields separately. This is also adding support for IGTKdata that was completely missing from the previous implementation. In addition, Key RSC for MGTK is now filled in and used when configuring the RX MGTK for a peer. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Do not use RX MGTK as RX IGTKJouni Malinen2016-06-191-3/+9
| | | | | | | | | The previous implementation was incorrect in forcing the MGTK to be used as the IGTK as well. Define new variable for storing IGTK and use that, if set, to configure IGTK to the driver. This commit does not yet fix AMPE element parsing to fill in this information. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Use variable length MGTK for RXJouni Malinen2016-06-191-4/+6
| | | | | | | | This extends the data structures to allow variable length MGTK to be stored for RX. This is needed as an initial step towards supporting different cipher suites. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Add variable length MTK supportJouni Malinen2016-06-191-2/+3
| | | | | | | This is needed as a part in enabling support for different pairwise ciphers in mesh. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Calculate MTK before sending it to MAC in case Open is droppedPeter Oh2016-05-131-0/+2
| | | | | | | | | | | | | | | IEEE Std 802.11-2012 State transitions require an action sending SETKEYS primitive to MAC when OPN_ACPT event occurs in CNF_RCVD state in case of AMPE is used, but since MTK calculation is missed in this condition, all zero valued key are passed to MAC and cause unicast packet decryption error. This could happen if the first transmission of plink Open frame is dropped and Confirm frame is processed first followed by retransmitted Open frame. Fix this by calculating the MTK also in this sequence of unexpected messages. Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
* mesh: Add missing action to cancel timerPeter Oh2016-05-131-0/+1
| | | | | | | | | | | | | IEEE Std 802.11-2012 Table 13-2, MPM finite state machine requires to clear retryTimer when CNF_ACPT event occurs in OPN_SNT state which is missing, so add it to comply with the standard. This was found while debugging an MTK issue and this commit fixes a potential issue that mesh sends invalid event (PLINK_OPEN) which will lead another invalid timer register such as MeshConfirm Timer. This behaviour might lead to undefined mesh state. Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
* mesh: Add support for PMKSA cachingMasashi Honma2016-03-201-5/+35
| | | | | | | | | | | | | | | | | | | | | | | | | This patch add functionality of mesh SAE PMKSA caching. If the local STA already has peer's PMKSA entry in the cache, skip SAE authentication and start AMPE with the cached value. If the peer does not support PMKSA caching or does not have the local STA's PMKSA entry in the cache, AMPE will fail and the PMKSA cache entry of the peer will be removed. Then STA retries with ordinary SAE authentication. If the peer does not support PMKSA caching and the local STA uses no_auto_peer=1, the local STA can not retry SAE authentication because NEW_PEER_CANDIDATE event cannot start SAE authentication when no_auto_peer=1. So this patch extends MESH_PEER_ADD command to use duration(sec). Throughout the duration, the local STA can start SAE authentication triggered by NEW_PEER_CANDIDATE even though no_auto_peer=1. This commit requires commit 70c93963edefa37ef84b73efb9d04ea10268341c ('SAE: Fix PMKID calculation for PMKSA cache'). Without that commit, chosen PMK comparison will fail. Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* mesh: Add MESH_PEER_ADD commandMasashi Honma2016-03-201-0/+44
| | | | | | | | This allows a mesh peer connection to be initiated manually in no_auto_peer mesh networks. Signed-off-by: Natsuki Itaya <Natsuki.Itaya@jp.sony.com> Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* mesh: Add MESH_PEER_REMOVE commandMasashi Honma2016-03-201-2/+23
| | | | | | | This command allows the specified mesh peer to be disconnected. Signed-off-by: Natsuki Itaya <Natsuki.Itaya@jp.sony.com> Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* mesh: Fix peer link counting when a mesh peer reconnectsSrinivasa Duvvuri2016-02-061-1/+3
| | | | | | | | | | | | | | | | | | | When a mesh point reconnects by starting from Authentication frame sequence, the plink count was not decremented from its last connection. This resulted in leaking peer link count and causing wpa_supplicant to reject the connection after max_peer_links (default: 99) reconnects. This was reproduced by pre-configuring 2 mesh points with mesh credentials. Boot both mesh points and make sure they connect to each other. Then in a loop reboot one of the mesh points after it successfully connects while leaving the other mesh point up and running. After 99 iterations the supplicant on mesh point that is not rebooting will reject the connection request from the other mesh point. Fix this by decrementing num_plinks when freeing a STA entry that is still in PLINK_ESTAB state. Signed-off-by: Srinivasa Duvvuri <sduvvuri@chromium.org>
* mesh: Do not force another peering exchange on driver eventJouni Malinen2016-01-061-3/+6
| | | | | | | | | | | If the local driver indicated a peer candidate event when the peer had already initiated peering exchange in open mesh case, we used to force a new exchange to be started instead of allowing the previously started exchange to complete. This is not desirable, so make this initiation of the new exchange conditional on there not being an already started (or successfully completed) exchange. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Do not clear link state on driver event if exchange was startedJouni Malinen2016-01-061-1/+2
| | | | | | | | | | | | | | If the local driver event for a new peer candidate arrived only after the peer had already initiated the peering exchange, we used to clear the link state. This resulted in the already completed (or in progress) exchange getting abandoned and a new exchange initiated. This is not desirable since the already started (or even completed) exchange can be used. Clear the link state only when adding the new STA entry for the first time, i.e., use the same !sta->my_lid condition in handling the driver event similarly to how the peer initiated cases were already handled. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Add some more details to MPM debug messagesJouni Malinen2016-01-061-2/+7
| | | | | | | This makes it easier to follow the debug log when trying to figure out issues with mesh peering exchange. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Connection and group started/removed events into debug logJouni Malinen2016-01-061-5/+4
| | | | | | | | The messages were sent out with wpa_msg_ctrl() so they were not visible in the debug log. However, these would be quite helpful strings to search for in the debug log, so change these messages to use wpa_msg(). Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Document Mesh Peering Management element structure in more detailJouni Malinen2015-12-281-12/+12
| | | | | | | | Provide details on the pointers to the subfields and rename "pmk" to "chosen_pmk" and use SAE_PMKID_LEN macro with it to make the code more readable. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
* mesh: Check PMKID in AMPE Action framesBob Copeland2015-12-281-1/+2
| | | | | | | | | | | | | From IEEE Std 802.11-2012 13.3.5: If the incoming Mesh Peering Management frame is for AMPE and the Chosen PMK from the received frame contains a PMKID that does not identify a valid mesh PMKSA, the frame shall be silently discarded. We were not checking the PMKID previously, and we also weren't parsing it correctly, so fix both. Signed-off-by: Bob Copeland <me@bobcopeland.com>
* Add VHT support for MeshPeter Oh2015-11-191-3/+23
| | | | | | | | | | Mesh Points themselves have capability to support VHT as long as hardware supports it. However, supporting VHT in mesh mode was disabled because no one had clearly tested and confirmed its functionality. Since VHT80 has now been verified to work with ath10k QCA988X driver and mac80211_hwsim, enable VHT support in mesh mode. Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
* Set WMM flag to Mesh STA by defaultPeter Oh2015-11-191-0/+3
| | | | | | | | Set WLAN_STA_WMM flag to Mesh STA by default since Mesh STAs are QoS STAs. Mesh STA's HT capabilities won't be parsed properly without the flag. Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
* mesh: Generate proper AID for peerBob Copeland2015-10-051-2/+8
| | | | | | | | | IEEE Std 802.11-2012 13.3.1 states that the AID should be generated on the local node for each peer. Previously, we were using the peer link ID (generated by the peer) which may not be unique among all peers. Correct this by reusing the AP AID generation code. Signed-off-by: Bob Copeland <me@bobcopeland.com>
* mesh: Add RSN IE to Mesh Peering Open/Confirm framesMasashi Honma2015-09-051-0/+6
| | | | | | | | | | The RSN IE is required by IEEE Std 802.11-2012 on SAE use case: Table 8-262 Mesh Peering Open frame Action field format Table 8-263 Mesh Peering Confirm frame Action field format Add the RSN IE to these frames. Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* Simplify HT Capabilities element parsingJouni Malinen2015-04-221-2/+1
| | | | | | | Check the element length in the parser and remove the length field from struct ieee802_11_elems since the element is of fixed length. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Create new station entry on popen framesBob Copeland2015-01-281-9/+42
| | | | | | | | | | | | | | Currently, there is a race in open mesh networks where mesh STA A receives a beacon from B and sends a peering open frame to initiate peering. STA B, having not yet received a beacon from A and thus created the corresponding station entry, will ignore all such open frames. If the beacon interval is sufficiently long then peering will not succeed as a result. In fact B can simply create the station entry when the popen is received, as is done in Linux's in-kernel MPM, avoiding the issue. Signed-off-by: Bob Copeland <me@bobcopeland.com>
* mesh: Always free the station if peering failedBob Copeland2015-01-281-8/+1
| | | | | | | | | | | | | Previously, we would only free the station entry if a peering close frame was received (freeing the station entry causes the kernel to start sending peer candidate events again when suitable beacons are received, triggering peering or authentication to restart). The end result is the same in any case regardless of close reason: if we leave holding state then peering has started again, so go ahead and remove the station in all cases. Signed-off-by: Bob Copeland <me@bobcopeland.com>
* mesh: Sync plink state with kernelMasashi Honma2015-01-281-4/+9
| | | | | | | | The plink_state exists both wpa_supplicant and kernel. Synchronize them with wpa_mesh_set_plink_state(). Signed-off-by: Kenzoh Nishikawa <Kenzoh.Nishikawa@jp.sony.com> Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
* mesh: Use a separate variable to track whether HT is enabledJouni Malinen2015-01-101-4/+2
| | | | | | | A network profile parameter should not be used to check whether the currently operating mesh has HT enabled. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Delay Authentication frame process with no_auto_peerJouni Malinen2014-12-231-0/+23
| | | | | | | | | | | | There is a possible race condition between receiving the NEW_PEER_CANDIDATE event and the Authentication frame from the peer. Previously, if the Authentication frame RX event was indicated first, that frame got dropped silently. Now, this frame is still dropped, but a copy of it is stored and the frame gets processed on the following NEW_PEER_CANDIDATE event if that is received for the same peer within two seconds. Signed-off-by: Jouni Malinen <j@w1.fi>
* mesh: Fill Number of Peerings field in Mesh Formation InfoMasashi Honma2014-12-211-2/+5
| | | | Signed-off-by: Masashi Honma <masashi.honma@gmail.com>