aboutsummaryrefslogtreecommitdiffstats
path: root/wpa_supplicant/wpa_supplicant.conf
diff options
context:
space:
mode:
authorLior David <qca_liord@qca.qualcomm.com>2016-08-03 14:53:21 (GMT)
committerJouni Malinen <j@w1.fi>2016-09-05 18:27:23 (GMT)
commitd1723c5566d0b582cf4309e725e22970fa1ce0a1 (patch)
tree6b22bc6f9c4aabe75890a10867766b0a8a3f3187 /wpa_supplicant/wpa_supplicant.conf
parentfaecb39236f79f2b3f23d20d85b0353c6541f580 (diff)
downloadhostap-d1723c5566d0b582cf4309e725e22970fa1ce0a1.zip
hostap-d1723c5566d0b582cf4309e725e22970fa1ce0a1.tar.gz
hostap-d1723c5566d0b582cf4309e725e22970fa1ce0a1.tar.bz2
wpa_supplicant: Allow FTM functionality to be published
Add configuration options that control publishing of fine timing measurement (FTM) responder and initiator functionality via bits 70, 71 of Extended Capabilities element. Typically, FTM functionality is controlled by a location framework outside wpa_supplicant. When framework is activated, it will use wpa_supplicant to configure the STA/AP to publish the FTM functionality. See IEEE P802.11-REVmc/D7.0, 9.4.2.27. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Diffstat (limited to 'wpa_supplicant/wpa_supplicant.conf')
-rw-r--r--wpa_supplicant/wpa_supplicant.conf16
1 files changed, 16 insertions, 0 deletions
diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index 6ece942..c3d5272 100644
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -449,6 +449,22 @@ fast_reauth=1
# sent to not-associated AP; if associated, AP BSSID)
#gas_address3=0
+# Publish fine timing measurement (FTM) responder functionality in
+# the Extended Capabilities element bit 70.
+# Controls whether FTM responder functionality will be published by AP/STA.
+# Note that actual FTM responder operation is managed outside wpa_supplicant.
+# 0 = Do not publish; default
+# 1 = Publish
+#ftm_responder=0
+
+# Publish fine timing measurement (FTM) initiator functionality in
+# the Extended Capabilities element bit 71.
+# Controls whether FTM initiator functionality will be published by AP/STA.
+# Note that actual FTM initiator operation is managed outside wpa_supplicant.
+# 0 = Do not publish; default
+# 1 = Publish
+#ftm_initiator=0
+
# credential block
#
# Each credential used for automatic network selection is configured as a set