aboutsummaryrefslogtreecommitdiffstats
path: root/wpa_supplicant/wpa_supplicant.conf
diff options
context:
space:
mode:
authorJouni Malinen <jouni@qca.qualcomm.com>2016-06-10 17:58:23 (GMT)
committerJouni Malinen <j@w1.fi>2016-06-10 18:44:49 (GMT)
commitc86bef2913a6aa9947d45e8d28bb0539c2d5c25c (patch)
treea2f83f63121967953f359eb8580717d2d0ee9c08 /wpa_supplicant/wpa_supplicant.conf
parent739fd20cc3f922c06b69d8d730e73909db4151c9 (diff)
downloadhostap-c86bef2913a6aa9947d45e8d28bb0539c2d5c25c.zip
hostap-c86bef2913a6aa9947d45e8d28bb0539c2d5c25c.tar.gz
hostap-c86bef2913a6aa9947d45e8d28bb0539c2d5c25c.tar.bz2
wpa_supplicant: Make GAS Address3 field selection behavior configurable
IEEE Std 802.11-2012, 10.19 (Public Action frame addressing) specifies that the wildcard BSSID value is used in Public Action frames that are transmitted to a STA that is not a member of the same BSS. wpa_supplicant used to use the actual BSSID value for all such frames regardless of whether the destination STA is a member of the BSS. P2P does not follow this rule, so P2P Public Action frame construction must not be changed. However, the cases using GAS/ANQP for non-P2P purposes should follow the standard requirements. Unfortunately, there are deployed AP implementations that do not reply to a GAS request sent using the wildcard BSSID value. The previously used behavior (Address3 = AP BSSID even when not associated) continues to be the default, but the IEEE 802.11 standard compliant addressing behavior can now be configured with gas_address3=1. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Diffstat (limited to 'wpa_supplicant/wpa_supplicant.conf')
-rw-r--r--wpa_supplicant/wpa_supplicant.conf6
1 files changed, 6 insertions, 0 deletions
diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index 2d487c5..3d34bc0 100644
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -440,6 +440,12 @@ fast_reauth=1
# matching network block
#auto_interworking=0
+# GAS Address3 field behavior
+# 0 = P2P specification (Address3 = AP BSSID); default
+# 1 = IEEE 802.11 standard compliant (Address3 = Wildcard BSSID when
+# sent to not-associated AP; if associated, AP BSSID)
+#gas_address3=0
+
# credential block
#
# Each credential used for automatic network selection is configured as a set