path: root/wpa_supplicant/wpa_supplicant.conf
diff options
authorJouni Malinen <jouni@qca.qualcomm.com>2013-03-21 13:52:41 (GMT)
committerJouni Malinen <j@w1.fi>2013-03-21 13:52:41 (GMT)
commit18a2eaabe3884fb253b13d1ad39fcdd6c87f4be7 (patch)
tree2a1e1bd0c5edfb117384e5d4ccf11244c556e867 /wpa_supplicant/wpa_supplicant.conf
parentb084df8b812c43ab9732323df3c8189aa27f0f5c (diff)
Add ap_vendor_elements for wpa_supplicant AP/P2P GO mode
This new parameter allows wpa_supplicant AP mode operations to use similar design to the vendor_elements parameter in hostapd to add vendor_elements into Beacon/Probe Response IE parameters. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
Diffstat (limited to 'wpa_supplicant/wpa_supplicant.conf')
1 files changed, 7 insertions, 0 deletions
diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index 1ded4e1..b407060 100644
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -295,6 +295,13 @@ fast_reauth=1
# Default value for Beacon interval (if not overridden in network block)
+# Additional vendor specific elements for Beacon and Probe Response frames
+# This parameter can be used to add additional vendor specific element(s) into
+# the end of the Beacon and Probe Response frames. The format for these
+# element(s) is a hexdump of the raw information elements (id+len+payload for
+# one or more elements). This is used in AP and P2P GO modes.
# Interworking (IEEE 802.11u)
# Enable Interworking