aboutsummaryrefslogtreecommitdiffstats
path: root/tests
diff options
context:
space:
mode:
authorMathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>2018-08-06 19:46:38 (GMT)
committerJouni Malinen <j@w1.fi>2018-12-17 13:42:23 (GMT)
commit6734ba0c0053806ce37d9be8f24ef3a5007cbed6 (patch)
tree555429f89501c233a7a1bcaec71a3a6c9b1eac8b /tests
parent3797b55cfc181e907cee6ce42742282fa5fd3005 (diff)
downloadhostap-6734ba0c0053806ce37d9be8f24ef3a5007cbed6.zip
hostap-6734ba0c0053806ce37d9be8f24ef3a5007cbed6.tar.gz
hostap-6734ba0c0053806ce37d9be8f24ef3a5007cbed6.tar.bz2
tests: OCI validation in the 4-way and group key handshakes (OCV)
Perform detailed tests with OCV enabled, for both the 4-way and group key handshakes. These tests include establishing a working connection with OCV enabled, assuring that a STA without OCV enabled can still connect to a STA with OCV enabled (and vice versa), verifying that invalid OCI elements get silently ignored, verifying that missing OCI elements are reported, and so on. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
Diffstat (limited to 'tests')
-rw-r--r--tests/hwsim/test_ocv.py864
-rw-r--r--tests/hwsim/wpasupplicant.py2
2 files changed, 865 insertions, 1 deletions
diff --git a/tests/hwsim/test_ocv.py b/tests/hwsim/test_ocv.py
new file mode 100644
index 0000000..6244d2a
--- /dev/null
+++ b/tests/hwsim/test_ocv.py
@@ -0,0 +1,864 @@
+# WPA2-Personal OCV tests
+# Copyright (c) 2018, Mathy Vanhoef
+#
+# This software may be distributed under the terms of the BSD license.
+# See README for more details
+
+from remotehost import remote_compatible
+import binascii, struct
+import logging, time
+logger = logging.getLogger()
+
+import hostapd
+from wpasupplicant import WpaSupplicant
+import hwsim_utils
+from utils import HwsimSkip
+
+from test_ap_ht import set_world_reg
+from test_ap_psk import parse_eapol, build_eapol, pmk_to_ptk, eapol_key_mic, recv_eapol, send_eapol, reply_eapol, hapd_connected, build_eapol_key_3_4, aes_wrap, pad_key_data
+
+#TODO: Refuse setting up AP with OCV but without MFP support
+#TODO: Refuse to connect to AP that advertises OCV but not MFP
+
+def make_ocikde(op_class, channel, seg1_idx):
+ WLAN_EID_VENDOR_SPECIFIC = 221
+ RSN_KEY_DATA_OCI = "\x00\x0f\xac\x0d"
+
+ data = RSN_KEY_DATA_OCI + struct.pack("<BBB", op_class, channel, seg1_idx)
+ ocikde = struct.pack("<BB", WLAN_EID_VENDOR_SPECIFIC, len(data)) + data
+
+ return ocikde
+
+def ocv_setup_ap(apdev, params):
+ ssid = "test-wpa2-ocv"
+ passphrase = "qwertyuiop"
+ params.update(hostapd.wpa2_params(ssid=ssid, passphrase=passphrase))
+ try:
+ hapd = hostapd.add_ap(apdev, params)
+ except Exception, e:
+ if "Failed to set hostapd parameter ocv" in str(e):
+ raise HwsimSkip("OCV not supported")
+ raise
+ return hapd, ssid, passphrase
+
+def build_eapol_key_1_2(kck, key_data, replay_counter=3, key_info=0x1382,
+ extra_len=0, descr_type=2, key_len=16):
+ msg = {}
+ msg['version'] = 2
+ msg['type'] = 3
+ msg['length'] = 95 + len(key_data) + extra_len
+
+ msg['descr_type'] = descr_type
+ msg['rsn_key_info'] = key_info
+ msg['rsn_key_len'] = key_len
+ msg['rsn_replay_counter'] = struct.pack('>Q', replay_counter)
+ msg['rsn_key_nonce'] = binascii.unhexlify('0000000000000000000000000000000000000000000000000000000000000000')
+ msg['rsn_key_iv'] = binascii.unhexlify('00000000000000000000000000000000')
+ msg['rsn_key_rsc'] = binascii.unhexlify('0000000000000000')
+ msg['rsn_key_id'] = binascii.unhexlify('0000000000000000')
+ msg['rsn_key_data_len'] = len(key_data)
+ msg['rsn_key_data'] = key_data
+ eapol_key_mic(kck, msg)
+ return msg
+
+def build_eapol_key_2_2(kck, key_data, replay_counter=3, key_info=0x0302,
+ extra_len=0, descr_type=2, key_len=16):
+ return build_eapol_key_1_2(kck, key_data, replay_counter, key_info,
+ extra_len, descr_type, key_len)
+
+@remote_compatible
+def test_wpa2_ocv(dev, apdev):
+ """OCV on 2.4 GHz"""
+ params = { "channel": "1",
+ "ieee80211w": "2",
+ "ocv": "1" }
+ hapd, ssid, passphrase = ocv_setup_ap(apdev[0], params)
+ for ocv in range(2):
+ dev[0].connect(ssid, psk=passphrase, scan_freq="2412", ocv=str(ocv),
+ ieee80211w="1")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+@remote_compatible
+def test_wpa2_ocv_5ghz(dev, apdev):
+ """OCV on 5 GHz"""
+ try:
+ run_wpa2_ocv_5ghz(dev, apdev)
+ finally:
+ set_world_reg(apdev[0], apdev[1], dev[0])
+ dev[0].flush_scan_cache()
+
+def run_wpa2_ocv_5ghz(dev, apdev):
+ params = { "hw_mode": "a",
+ "channel": "40",
+ "ieee80211w": "2",
+ "country_code": "US",
+ "ocv": "1" }
+ hapd, ssid, passphrase = ocv_setup_ap(apdev[0], params)
+ for ocv in range(2):
+ dev[0].connect(ssid, psk=passphrase, scan_freq="5200", ocv=str(ocv),
+ ieee80211w="1")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+@remote_compatible
+def test_wpa2_ocv_ht20(dev, apdev):
+ """OCV with HT20 channel"""
+ params = { "channel": "6",
+ "ieee80211n": "1",
+ "ieee80211w": "1",
+ "ocv": "1" }
+ hapd, ssid, passphrase = ocv_setup_ap(apdev[0], params)
+ for ocv in range(2):
+ dev[0].connect(ssid, psk=passphrase, scan_freq="2437", ocv=str(ocv),
+ ieee80211w="1", disable_ht="1")
+ dev[1].connect(ssid, psk=passphrase, scan_freq="2437", ocv=str(ocv),
+ ieee80211w="1")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[1].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+ dev[1].wait_disconnected()
+
+@remote_compatible
+def test_wpa2_ocv_ht40(dev, apdev):
+ """OCV with HT40 channel"""
+ try:
+ run_wpa2_ocv_ht40(dev, apdev)
+ finally:
+ set_world_reg(apdev[0], apdev[1], dev[0])
+ dev[0].flush_scan_cache()
+ dev[1].flush_scan_cache()
+
+def run_wpa2_ocv_ht40(dev, apdev):
+ for channel, capab, freq, mode in [( "6", "[HT40-]", "2437", "g"),
+ ( "6", "[HT40+]", "2437", "g"),
+ ("40", "[HT40-]", "5200", "a"),
+ ("36", "[HT40+]", "5180", "a")]:
+ params = { "hw_mode": mode,
+ "channel": channel,
+ "country_code": "US",
+ "ieee80211n": "1",
+ "ht_capab": capab,
+ "ieee80211w": "1",
+ "ocv": "1" }
+ hapd, ssid, passphrase = ocv_setup_ap(apdev[0], params)
+ dev[0].flush_scan_cache()
+ dev[1].flush_scan_cache()
+ for ocv in range(2):
+ dev[0].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1", disable_ht="1")
+ dev[1].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[1].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+ dev[1].wait_disconnected()
+ hapd.disable()
+
+@remote_compatible
+def test_wpa2_ocv_vht40(dev, apdev):
+ """OCV with VHT40 channel"""
+ try:
+ run_wpa2_ocv_vht40(dev, apdev)
+ finally:
+ set_world_reg(apdev[0], apdev[1], dev[0])
+ dev[0].flush_scan_cache()
+ dev[1].flush_scan_cache()
+ dev[2].flush_scan_cache()
+
+def run_wpa2_ocv_vht40(dev, apdev):
+ for channel, capab, freq in [("40", "[HT40-]", "5200"),
+ ("36", "[HT40+]", "5180")]:
+ params = { "hw_mode": "a",
+ "channel": channel,
+ "country_code": "US",
+ "ht_capab": capab,
+ "ieee80211n": "1",
+ "ieee80211ac": "1",
+ "vht_oper_chwidth": "0",
+ "vht_oper_centr_freq_seg0_idx": "38",
+ "ieee80211w": "1",
+ "ocv": "1" }
+ hapd, ssid, passphrase = ocv_setup_ap(apdev[0], params)
+ dev[0].flush_scan_cache()
+ dev[1].flush_scan_cache()
+ dev[2].flush_scan_cache()
+ for ocv in range(2):
+ dev[0].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1", disable_ht="1")
+ dev[1].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1", disable_vht="1")
+ dev[2].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[1].request("REMOVE_NETWORK all")
+ dev[2].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+ dev[1].wait_disconnected()
+ dev[2].wait_disconnected()
+ hapd.disable()
+
+@remote_compatible
+def test_wpa2_ocv_vht80(dev, apdev):
+ """OCV with VHT80 channel"""
+ try:
+ run_wpa2_ocv_vht80(dev, apdev)
+ finally:
+ set_world_reg(apdev[0], apdev[1], dev[0])
+ dev[0].flush_scan_cache()
+ dev[1].flush_scan_cache()
+ dev[2].flush_scan_cache()
+
+def run_wpa2_ocv_vht80(dev, apdev):
+ for channel, capab, freq in [("40", "[HT40-]", "5200"),
+ ("36", "[HT40+]", "5180")]:
+ params = { "hw_mode": "a",
+ "channel": channel,
+ "country_code": "US",
+ "ht_capab": capab,
+ "ieee80211n": "1",
+ "ieee80211ac": "1",
+ "vht_oper_chwidth": "1",
+ "vht_oper_centr_freq_seg0_idx": "42",
+ "ieee80211w": "1",
+ "ocv": "1" }
+ hapd, ssid, passphrase = ocv_setup_ap(apdev[0], params)
+ for ocv in range(2):
+ dev[0].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1", disable_ht="1")
+ dev[1].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1", disable_vht="1")
+ dev[2].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[1].request("REMOVE_NETWORK all")
+ dev[2].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+ dev[1].wait_disconnected()
+ dev[2].wait_disconnected()
+ hapd.disable()
+
+@remote_compatible
+def test_wpa2_ocv_vht160(dev, apdev):
+ """OCV with VHT160 channel"""
+ try:
+ run_wpa2_ocv_vht160(dev, apdev)
+ finally:
+ set_world_reg(apdev[0], apdev[1], dev[0])
+ dev[0].flush_scan_cache()
+ dev[1].flush_scan_cache()
+ dev[2].flush_scan_cache()
+
+def run_wpa2_ocv_vht160(dev, apdev):
+ for channel, capab, freq in [("100", "[HT40+]", "5500"),
+ ("104", "[HT40-]", "5520")]:
+ params = { "hw_mode": "a",
+ "channel": channel,
+ "country_code": "ZA",
+ "ht_capab": capab,
+ "ieee80211n": "1",
+ "ieee80211ac": "1",
+ "vht_oper_chwidth": "2",
+ "vht_oper_centr_freq_seg0_idx": "114",
+ "ieee80211w": "1",
+ "ocv": "1" }
+ hapd, ssid, passphrase = ocv_setup_ap(apdev[0], params)
+ for ocv in range(2):
+ dev[0].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1", disable_ht="1")
+ dev[1].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1", disable_vht="1")
+ dev[2].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[1].request("REMOVE_NETWORK all")
+ dev[2].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+ dev[1].wait_disconnected()
+ dev[2].wait_disconnected()
+ hapd.disable()
+
+@remote_compatible
+def test_wpa2_ocv_vht80plus80(dev, apdev):
+ """OCV with VHT80+80 channel"""
+ try:
+ run_wpa2_ocv_vht80plus80(dev, apdev)
+ finally:
+ set_world_reg(apdev[0], apdev[1], dev[0])
+ dev[0].flush_scan_cache()
+ dev[1].flush_scan_cache()
+ dev[2].flush_scan_cache()
+
+def run_wpa2_ocv_vht80plus80(dev, apdev):
+ for channel, capab, freq in [("36", "[HT40+]", "5180"),
+ ("40", "[HT40-]", "5200")]:
+ params = { "hw_mode": "a",
+ "channel": channel,
+ "country_code": "US",
+ "ht_capab": capab,
+ "ieee80211n": "1",
+ "ieee80211ac": "1",
+ "vht_oper_chwidth": "3",
+ "vht_oper_centr_freq_seg0_idx": "42",
+ "vht_oper_centr_freq_seg1_idx": "155",
+ "ieee80211w": "1",
+ "ieee80211d": "1",
+ "ieee80211h": "1",
+ "ocv": "1" }
+ hapd, ssid, passphrase = ocv_setup_ap(apdev[0], params)
+ for ocv in range(2):
+ dev[0].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1", disable_ht="1")
+ dev[1].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1", disable_vht="1")
+ dev[2].connect(ssid, psk=passphrase, scan_freq=freq, ocv=str(ocv),
+ ieee80211w="1")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[1].request("REMOVE_NETWORK all")
+ dev[2].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+ dev[1].wait_disconnected()
+ dev[2].wait_disconnected()
+ hapd.disable()
+
+class APConnection:
+ def init_params(self):
+ # Static parameters
+ self.ssid = "test-wpa2-ocv"
+ self.passphrase = "qwertyuiop"
+ self.psk = "c2c6c255af836bed1b3f2f1ded98e052f5ad618bb554e2836757b55854a0eab7"
+
+ # Dynamic parameters
+ self.hapd = None
+ self.addr = None
+ self.rsne = None
+ self.kck = None
+ self.kek = None
+ self.msg = None
+ self.bssid = None
+ self.anonce = None
+ self.snonce = None
+
+ def __init__(self, apdev, dev, params):
+ self.init_params()
+
+ # By default, OCV is enabled for both the client and AP. The following
+ # parameters can be used to disable OCV for the client or AP.
+ ap_ocv = params.pop("ap_ocv", "1")
+ sta_ocv = params.pop("sta_ocv", "1")
+
+ freq = params.pop("freq")
+ params.update(hostapd.wpa2_params(ssid=self.ssid,
+ passphrase=self.passphrase))
+ params["wpa_pairwise_update_count"] = "10"
+ params["ocv"] = ap_ocv
+ try:
+ self.hapd = hostapd.add_ap(apdev, params)
+ except Exception, e:
+ if "Failed to set hostapd parameter ocv" in str(e):
+ raise HwsimSkip("OCV not supported")
+ raise
+ self.hapd.request("SET ext_eapol_frame_io 1")
+ dev.request("SET ext_eapol_frame_io 1")
+
+ self.bssid = apdev['bssid']
+ pmk = binascii.unhexlify("c2c6c255af836bed1b3f2f1ded98e052f5ad618bb554e2836757b55854a0eab7")
+
+ if sta_ocv != "0":
+ self.rsne = binascii.unhexlify("301a0100000fac040100000fac040100000fac0280400000000fac06")
+ else:
+ self.rsne = binascii.unhexlify("301a0100000fac040100000fac040100000fac0280000000000fac06")
+ self.snonce = binascii.unhexlify('1111111111111111111111111111111111111111111111111111111111111111')
+
+ dev.connect(self.ssid, raw_psk=self.psk, scan_freq=freq, ocv=sta_ocv,
+ ieee80211w="1", wait_connect=False)
+ self.addr = dev.p2p_interface_addr()
+
+ # Wait for EAPOL-Key msg 1/4 from hostapd to determine when associated
+ self.msg = recv_eapol(self.hapd)
+ self.anonce = self.msg['rsn_key_nonce']
+ (ptk, self.kck, self.kek) = pmk_to_ptk(pmk, self.addr, self.bssid,
+ self.snonce,self.anonce)
+
+ # hapd, addr, rsne, kck, msg, anonce, snonce
+ def test_bad_oci(self, logmsg, op_class, channel, seg1_idx):
+ logger.debug("Bad OCI element: " + logmsg)
+ if op_class is None:
+ ocikde = ""
+ else:
+ ocikde = make_ocikde(op_class, channel, seg1_idx)
+
+ reply_eapol("2/4", self.hapd, self.addr, self.msg, 0x010a, self.snonce,
+ self.rsne + ocikde, self.kck)
+ self.msg = recv_eapol(self.hapd)
+ if self.anonce != self.msg['rsn_key_nonce'] or self.msg["rsn_key_info"] != 138:
+ raise Exception("Didn't receive retransmitted 1/4")
+
+ def confirm_valid_oci(self, op_class, channel, seg1_idx):
+ logger.debug("Valid OCI element to complete handshake")
+ ocikde = make_ocikde(op_class, channel, seg1_idx)
+
+ reply_eapol("2/4", self.hapd, self.addr, self.msg, 0x010a, self.snonce,
+ self.rsne + ocikde, self.kck)
+ self.msg = recv_eapol(self.hapd)
+ if self.anonce != self.msg['rsn_key_nonce'] or self.msg["rsn_key_info"] != 5066:
+ raise Exception("Didn't receive 3/4 in response to valid 2/4")
+
+ reply_eapol("4/4", self.hapd, self.addr, self.msg, 0x030a, None, None,
+ self.kck)
+ hapd_connected(self.hapd)
+
+@remote_compatible
+def test_wpa2_ocv_ap_mismatch(dev, apdev):
+ """OCV AP mismatch"""
+ params = { "channel": "1",
+ "ieee80211w": "1",
+ "freq": "2412" }
+ conn = APConnection(apdev[0], dev[0], params)
+ conn.test_bad_oci("element missing", None, 0, 0)
+ conn.test_bad_oci("wrong channel number", 81, 6, 0)
+ conn.test_bad_oci("invalid channel number", 81, 0, 0)
+ conn.test_bad_oci("wrong operating class", 80, 0, 0)
+ conn.test_bad_oci("invalid operating class", 0, 0, 0)
+ conn.confirm_valid_oci(81, 1, 0)
+
+@remote_compatible
+def test_wpa2_ocv_ap_ht_mismatch(dev, apdev):
+ """OCV AP mismatch (HT)"""
+ params = { "channel": "6",
+ "ht_capab": "[HT40-]",
+ "ieee80211w": "1",
+ "freq": "2437" }
+ conn = APConnection(apdev[0], dev[0], params)
+ conn.test_bad_oci("wrong primary channel", 84, 5, 0)
+ conn.test_bad_oci("lower bandwidth than negotiated", 81, 6, 0)
+ conn.test_bad_oci("bad upper/lower channel", 83, 6, 0)
+ conn.confirm_valid_oci(84, 6, 0)
+
+@remote_compatible
+def test_wpa2_ocv_ap_vht80_mismatch(dev, apdev):
+ """OCV AP mismatch (VHT80)"""
+ try:
+ run_wpa2_ocv_ap_vht80_mismatch(dev, apdev)
+ finally:
+ set_world_reg(apdev[0], apdev[1], dev[0])
+ dev[0].flush_scan_cache()
+
+def run_wpa2_ocv_ap_vht80_mismatch(dev, apdev):
+ params = { "hw_mode": "a",
+ "channel": "36",
+ "country_code": "US",
+ "ht_capab": "[HT40+]",
+ "ieee80211w": "1",
+ "ieee80211n": "1",
+ "ieee80211ac": "1",
+ "vht_oper_chwidth": "1",
+ "freq": "5180",
+ "vht_oper_centr_freq_seg0_idx": "42" }
+ conn = APConnection(apdev[0], dev[0], params)
+ conn.test_bad_oci("wrong primary channel", 128, 38, 0)
+ conn.test_bad_oci("wrong primary channel", 128, 32, 0)
+ conn.test_bad_oci("smaller bandwidth than negotiated", 116, 36, 0)
+ conn.test_bad_oci("smaller bandwidth than negotiated", 115, 36, 0)
+ conn.confirm_valid_oci(128, 36, 0)
+
+ dev[0].dump_monitor()
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+
+@remote_compatible
+def test_wpa2_ocv_ap_vht160_mismatch(dev, apdev):
+ """OCV AP mismatch (VHT160)"""
+ try:
+ run_wpa2_ocv_ap_vht160_mismatch(dev, apdev)
+ finally:
+ set_world_reg(apdev[0], apdev[1], dev[0])
+ dev[0].flush_scan_cache()
+
+def run_wpa2_ocv_ap_vht160_mismatch(dev, apdev):
+ params = { "hw_mode": "a",
+ "channel": "100",
+ "country_code": "ZA",
+ "ht_capab": "[HT40+]",
+ "ieee80211w": "1",
+ "ieee80211n": "1",
+ "ieee80211ac": "1",
+ "vht_oper_chwidth": "2",
+ "freq": "5500",
+ "vht_oper_centr_freq_seg0_idx": "114",
+ "ieee80211d": "1",
+ "ieee80211h": "1" }
+ conn = APConnection(apdev[0], dev[0], params)
+ conn.test_bad_oci("wrong primary channel", 129, 36, 0)
+ conn.test_bad_oci("wrong primary channel", 129, 114, 0)
+ conn.test_bad_oci("smaller bandwidth (20 Mhz) than negotiated", 121, 100, 0)
+ conn.test_bad_oci("smaller bandwidth (40 Mhz) than negotiated", 122, 100, 0)
+ conn.test_bad_oci("smaller bandwidth (80 Mhz) than negotiated", 128, 100, 0)
+ conn.test_bad_oci("using 80+80 channel instead of 160", 130, 100, 155)
+ conn.confirm_valid_oci(129, 100, 0)
+
+ dev[0].dump_monitor()
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+
+@remote_compatible
+def test_wpa2_ocv_ap_vht80plus80_mismatch(dev, apdev):
+ """OCV AP mismatch (VHT80+80)"""
+ try:
+ run_wpa2_ocv_ap_vht80plus80_mismatch(dev, apdev)
+ finally:
+ set_world_reg(apdev[0], apdev[1], dev[0])
+ dev[0].flush_scan_cache()
+
+def run_wpa2_ocv_ap_vht80plus80_mismatch(dev, apdev):
+ params = { "hw_mode": "a",
+ "channel": "36",
+ "country_code": "US",
+ "ht_capab": "[HT40+]",
+ "ieee80211w": "1",
+ "ieee80211n": "1",
+ "ieee80211ac": "1",
+ "vht_oper_chwidth": "3",
+ "freq": "5180",
+ "vht_oper_centr_freq_seg0_idx": "42",
+ "ieee80211d": "1",
+ "vht_oper_centr_freq_seg1_idx": "155",
+ "ieee80211h": "1" }
+ conn = APConnection(apdev[0], dev[0], params)
+ conn.test_bad_oci("using 80 MHz operating class", 128, 36, 155)
+ conn.test_bad_oci("wrong frequency segment 1", 130, 36, 138)
+ conn.confirm_valid_oci(130, 36, 155)
+
+ dev[0].dump_monitor()
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+
+@remote_compatible
+def test_wpa2_ocv_ap_unexpected1(dev, apdev):
+ """OCV and unexpected OCI KDE from station"""
+ params = { "channel": "1",
+ "ieee80211w": "1",
+ "ap_ocv": "0",
+ "sta_ocv": "1",
+ "freq": "2412" }
+ conn = APConnection(apdev[0], dev[0], params)
+ logger.debug("Client will send OCI KDE even if it was not negotiated")
+ conn.confirm_valid_oci(81, 1, 0)
+
+@remote_compatible
+def test_wpa2_ocv_ap_unexpected2(dev, apdev):
+ """OCV and unexpected OCI KDE from station"""
+ params = { "channel": "1",
+ "ieee80211w": "1",
+ "ap_ocv": "1",
+ "sta_ocv": "0",
+ "freq": "2412" }
+ conn = APConnection(apdev[0], dev[0], params)
+ logger.debug("Client will send OCI KDE even if it was not negotiated")
+ conn.confirm_valid_oci(81, 1, 0)
+
+@remote_compatible
+def test_wpa2_ocv_ap_retransmit_msg3(dev, apdev):
+ """Verify that manually retransmitted msg 3/4 contain a correct OCI"""
+ bssid = apdev[0]['bssid']
+ ssid = "test-wpa2-ocv"
+ passphrase = "qwertyuiop"
+ psk = "c2c6c255af836bed1b3f2f1ded98e052f5ad618bb554e2836757b55854a0eab7"
+ params = hostapd.wpa2_params(ssid=ssid)
+ params["wpa_psk"] = psk
+ params["ieee80211w"] = "1"
+ params["ocv"] = "1"
+ params['wpa_disable_eapol_key_retries'] = "1"
+ try:
+ hapd = hostapd.add_ap(apdev[0], params)
+ except Exception, e:
+ if "Failed to set hostapd parameter ocv" in str(e):
+ raise HwsimSkip("OCV not supported")
+ raise
+ hapd.request("SET ext_eapol_frame_io 1")
+ dev[0].request("SET ext_eapol_frame_io 1")
+ dev[0].connect(ssid, psk=passphrase, scan_freq="2412", wait_connect=False,
+ ocv="1", ieee80211w="1")
+ addr = dev[0].own_addr()
+
+ # EAPOL-Key msg 1/4
+ ev = hapd.wait_event(["EAPOL-TX"], timeout=15)
+ if ev is None:
+ raise Exception("Timeout on EAPOL-TX from hostapd")
+ res = dev[0].request("EAPOL_RX " + bssid + " " + ev.split(' ')[2])
+ if "OK" not in res:
+ raise Exception("EAPOL_RX to wpa_supplicant failed")
+
+ # EAPOL-Key msg 2/4
+ ev = dev[0].wait_event(["EAPOL-TX"], timeout=15)
+ if ev is None:
+ raise Exception("Timeout on EAPOL-TX from wpa_supplicant")
+ res = hapd.request("EAPOL_RX " + addr + " " + ev.split(' ')[2])
+ if "OK" not in res:
+ raise Exception("EAPOL_RX to hostapd failed")
+
+ # EAPOL-Key msg 3/4
+ ev = hapd.wait_event(["EAPOL-TX"], timeout=15)
+ if ev is None:
+ raise Exception("Timeout on EAPOL-TX from hostapd")
+ logger.info("Drop the first EAPOL-Key msg 3/4")
+
+ # Use normal EAPOL TX/RX to handle retries.
+ hapd.request("SET ext_eapol_frame_io 0")
+ dev[0].request("SET ext_eapol_frame_io 0")
+
+ # Manually retransmit EAPOL-Key msg 3/4
+ if "OK" not in hapd.request("RESEND_M3 " + addr):
+ raise Exception("RESEND_M3 failed")
+
+ dev[0].wait_connected()
+ hwsim_utils.test_connectivity(dev[0], hapd)
+
+def test_wpa2_ocv_ap_group_hs(dev, apdev):
+ """OCV group handshake (AP)"""
+ params = { "channel": "1",
+ "ieee80211w": "1",
+ "freq": "2412",
+ "wpa_strict_rekey": "1" }
+ conn = APConnection(apdev[0], dev[0], params)
+ conn.confirm_valid_oci(81, 1, 0)
+
+ conn.hapd.request("SET ext_eapol_frame_io 0")
+ dev[1].connect(conn.ssid, psk=conn.passphrase, scan_freq="2412", ocv="1",
+ ieee80211w="1")
+ conn.hapd.request("SET ext_eapol_frame_io 1")
+
+ # Trigger a group key handshake
+ dev[1].request("DISCONNECT")
+ dev[0].dump_monitor()
+
+ # Wait for EAPOL-Key msg 1/2
+ conn.msg = recv_eapol(conn.hapd)
+ if conn.msg["rsn_key_info"] != 4994:
+ raise Exception("Didn't receive 1/2 of group key handshake")
+
+ # Send a EAPOL-Key msg 2/2 with a bad OCI
+ logger.info("Bad OCI element")
+ ocikde = make_ocikde(1, 1, 1)
+ msg = build_eapol_key_2_2(conn.kck, ocikde, replay_counter=3)
+ conn.hapd.dump_monitor()
+ send_eapol(conn.hapd, conn.addr, build_eapol(msg))
+
+ # Wait for retransmitted EAPOL-Key msg 1/2
+ conn.msg = recv_eapol(conn.hapd)
+ if conn.msg["rsn_key_info"] != 4994:
+ raise Exception("Didn't receive 1/2 of group key handshake")
+
+ # Send a EAPOL-Key msg 2/2 with a good OCI
+ logger.info("Good OCI element")
+ ocikde = make_ocikde(81, 1, 0)
+ msg = build_eapol_key_2_2(conn.kck, ocikde, replay_counter=4)
+ conn.hapd.dump_monitor()
+ send_eapol(conn.hapd, conn.addr, build_eapol(msg))
+
+ # Verify that group key handshake has completed
+ ev = conn.hapd.wait_event(["EAPOL-TX"], timeout=1)
+ if ev is not None:
+ eapol = binascii.unhexlify(ev.split(' ')[2])
+ msg = parse_eapol(eapol)
+ if msg["rsn_key_info"] == 4994:
+ raise Exception("AP didn't accept 2/2 of group key handshake")
+
+class STAConnection:
+ def init_params(self):
+ # Static parameters
+ self.ssid = "test-wpa2-ocv"
+ self.passphrase = "qwertyuiop"
+ self.psk = "c2c6c255af836bed1b3f2f1ded98e052f5ad618bb554e2836757b55854a0eab7"
+
+ # Dynamic parameters
+ self.hapd = None
+ self.dev = None
+ self.addr = None
+ self.rsne = None
+ self.kck = None
+ self.kek = None
+ self.msg = None
+ self.bssid = None
+ self.anonce = None
+ self.snonce = None
+ self.gtkie = None
+ self.counter = None
+
+ def __init__(self, apdev, dev, params, sta_params=None):
+ self.init_params()
+ self.dev = dev
+ self.bssid = apdev['bssid']
+
+ freq = params.pop("freq")
+ if sta_params is None:
+ sta_params = dict()
+ if not "ocv" in sta_params:
+ sta_params["ocv"] = "1"
+ if not "ieee80211w" in sta_params:
+ sta_params["ieee80211w"] = "1"
+
+ params.update(hostapd.wpa2_params(ssid=self.ssid,
+ passphrase=self.passphrase))
+ params['wpa_pairwise_update_count'] = "10"
+
+ try:
+ self.hapd = hostapd.add_ap(apdev, params)
+ except Exception, e:
+ if "Failed to set hostapd parameter ocv" in str(e):
+ raise HwsimSkip("OCV not supported")
+ raise
+ self.hapd.request("SET ext_eapol_frame_io 1")
+ self.dev.request("SET ext_eapol_frame_io 1")
+ pmk = binascii.unhexlify("c2c6c255af836bed1b3f2f1ded98e052f5ad618bb554e2836757b55854a0eab7")
+
+ self.gtkie = binascii.unhexlify("dd16000fac010100dc11188831bf4aa4a8678d2b41498618")
+ if sta_params["ocv"] != "0":
+ self.rsne = binascii.unhexlify("30140100000fac040100000fac040100000fac028c40")
+ else:
+ self.rsne = binascii.unhexlify("30140100000fac040100000fac040100000fac028c00")
+
+ self.dev.connect(self.ssid, raw_psk=self.psk, scan_freq=freq,
+ wait_connect=False, **sta_params)
+ self.addr = dev.p2p_interface_addr()
+
+ # Forward msg 1/4 from AP to STA
+ self.msg = recv_eapol(self.hapd)
+ self.anonce = self.msg['rsn_key_nonce']
+ send_eapol(self.dev, self.bssid, build_eapol(self.msg))
+
+ # Capture msg 2/4 from the STA so we can derive the session keys
+ self.msg = recv_eapol(dev)
+ self.snonce = self.msg['rsn_key_nonce']
+ (ptk, self.kck, self.kek) = pmk_to_ptk(pmk, self.addr, self.bssid,
+ self.snonce,self.anonce)
+
+ self.counter = struct.unpack('>Q',
+ self.msg['rsn_replay_counter'])[0] + 1
+
+ def test_bad_oci(self, logmsg, op_class, channel, seg1_idx, errmsg):
+ logger.info("Bad OCI element: " + logmsg)
+ if op_class is None:
+ ocikde = ""
+ else:
+ ocikde = make_ocikde(op_class, channel, seg1_idx)
+
+ plain = self.rsne + self.gtkie + ocikde
+ wrapped = aes_wrap(self.kek, pad_key_data(plain))
+ msg = build_eapol_key_3_4(self.anonce, self.kck, wrapped,
+ replay_counter=self.counter)
+
+ self.dev.dump_monitor()
+ send_eapol(self.dev, self.bssid, build_eapol(msg))
+ self.counter += 1
+
+ ev = self.dev.wait_event([errmsg], timeout=5)
+ if ev is None:
+ raise Exception("Bad OCI not reported")
+
+ def confirm_valid_oci(self, op_class, channel, seg1_idx):
+ logger.debug("Valid OCI element to complete handshake")
+ ocikde = make_ocikde(op_class, channel, seg1_idx)
+
+ plain = self.rsne + self.gtkie + ocikde
+ wrapped = aes_wrap(self.kek, pad_key_data(plain))
+ msg = build_eapol_key_3_4(self.anonce, self.kck, wrapped,
+ replay_counter=self.counter)
+
+ self.dev.dump_monitor()
+ send_eapol(self.dev, self.bssid, build_eapol(msg))
+ self.counter += 1
+
+ self.dev.wait_connected(timeout=1)
+
+@remote_compatible
+def test_wpa2_ocv_mismatch_client(dev, apdev):
+ """OCV client mismatch"""
+ params = { "channel": "1",
+ "ieee80211w": "1",
+ "ocv": "1",
+ "freq": "2412" }
+ conn = STAConnection(apdev[0], dev[0], params)
+ conn.test_bad_oci("element missing", None, 0, 0,
+ "did not receive mandatory OCI")
+ conn.test_bad_oci("wrong channel number", 81, 6, 0,
+ "primary channel mismatch")
+ conn.test_bad_oci("invalid channel number", 81, 0, 0,
+ "unable to interpret received OCI")
+ conn.test_bad_oci("wrong operating class", 80, 0, 0,
+ "unable to interpret received OCI")
+ conn.test_bad_oci("invalid operating class", 0, 0, 0,
+ "unable to interpret received OCI")
+ conn.confirm_valid_oci(81, 1, 0)
+
+@remote_compatible
+def test_wpa2_ocv_vht160_mismatch_client(dev, apdev):
+ """OCV client mismatch (VHT160)"""
+ try:
+ run_wpa2_ocv_vht160_mismatch_client(dev, apdev)
+ finally:
+ set_world_reg(apdev[0], apdev[1], dev[0])
+ dev[0].flush_scan_cache()
+
+def run_wpa2_ocv_vht160_mismatch_client(dev, apdev):
+ params = { "hw_mode": "a",
+ "channel": "100",
+ "country_code": "ZA",
+ "ht_capab": "[HT40+]",
+ "ieee80211w": "1",
+ "ieee80211n": "1",
+ "ieee80211ac": "1",
+ "vht_oper_chwidth": "2",
+ "ocv": "1",
+ "vht_oper_centr_freq_seg0_idx": "114",
+ "freq": "5500",
+ "ieee80211d": "1",
+ "ieee80211h": "1" }
+ sta_params = { "disable_vht": "1" }
+ conn = STAConnection(apdev[0], dev[0], params, sta_params)
+ conn.test_bad_oci("smaller bandwidth (20 Mhz) than negotiated",
+ 121, 100, 0, "channel bandwidth mismatch")
+ conn.test_bad_oci("wrong frequency, bandwith, and secondary channel",
+ 123, 104, 0, "primary channel mismatch")
+ conn.test_bad_oci("wrong upper/lower behaviour",
+ 129, 104, 0, "primary channel mismatch")
+ conn.confirm_valid_oci(122, 100, 0)
+
+def test_wpa2_ocv_sta_group_hs(dev, apdev):
+ """OCV group handshake (STA)"""
+ params = { "channel": "1",
+ "ieee80211w": "1",
+ "ocv": "1",
+ "freq": "2412",
+ "wpa_strict_rekey": "1" }
+ conn = STAConnection(apdev[0], dev[0], params.copy())
+ conn.confirm_valid_oci(81, 1, 0)
+
+ # Send a EAPOL-Key msg 1/2 with a bad OCI
+ logger.info("Bad OCI element")
+ plain = conn.gtkie + make_ocikde(1, 1, 1)
+ wrapped = aes_wrap(conn.kek, pad_key_data(plain))
+ msg = build_eapol_key_1_2(conn.kck, wrapped, replay_counter=3)
+ send_eapol(dev[0], conn.bssid, build_eapol(msg))
+
+ # We shouldn't get a EAPOL-Key message back
+ ev = dev[0].wait_event(["EAPOL-TX"], timeout=1)
+ if ev is not None:
+ raise Exception("Received response to invalid EAPOL-Key 1/2")
+
+ # Reset AP to try with valid OCI
+ conn.hapd.disable()
+ conn = STAConnection(apdev[0], dev[0], params.copy())
+ conn.confirm_valid_oci(81, 1, 0)
+
+ # Send a EAPOL-Key msg 1/2 with a good OCI
+ logger.info("Good OCI element")
+ plain = conn.gtkie + make_ocikde(81, 1, 0)
+ wrapped = aes_wrap(conn.kek, pad_key_data(plain))
+ msg = build_eapol_key_1_2(conn.kck, wrapped, replay_counter=4)
+ send_eapol(dev[0], conn.bssid, build_eapol(msg))
+
+ # Wait for EAPOL-Key msg 2/2
+ conn.msg = recv_eapol(dev[0])
+ if conn.msg["rsn_key_info"] != 0x0302:
+ raise Exception("Didn't receive 2/2 of group key handshake")
diff --git a/tests/hwsim/wpasupplicant.py b/tests/hwsim/wpasupplicant.py
index 78b5f6d..f96863f 100644
--- a/tests/hwsim/wpasupplicant.py
+++ b/tests/hwsim/wpasupplicant.py
@@ -1031,7 +1031,7 @@ class WpaSupplicant:
"dpp_csign", "dpp_csign_expiry",
"dpp_netaccesskey", "dpp_netaccesskey_expiry",
"group_mgmt", "owe_group",
- "roaming_consortium_selection" ]
+ "roaming_consortium_selection", "ocv" ]
for field in not_quoted:
if field in kwargs and kwargs[field]:
self.set_network(id, field, kwargs[field])