aboutsummaryrefslogtreecommitdiffstats
path: root/src/common/qca-vendor.h
diff options
context:
space:
mode:
authorJiani Liu <jianil@codeaurora.org>2019-02-18 05:39:49 (GMT)
committerJouni Malinen <j@w1.fi>2019-02-21 10:24:45 (GMT)
commit239794018e68db670889ce96e0949e670f60054a (patch)
treebbf9e27b3be8d8ec6ada9fad99d7ee981d040b9c /src/common/qca-vendor.h
parentd939a8cb493a6bed7faac4dd26d43f5bcee8c270 (diff)
downloadhostap-239794018e68db670889ce96e0949e670f60054a.zip
hostap-239794018e68db670889ce96e0949e670f60054a.tar.gz
hostap-239794018e68db670889ce96e0949e670f60054a.tar.bz2
Add new QCA vendor attributes for coex configuration
Signed-off-by: Jiani Liu <jianil@codeaurora.org>
Diffstat (limited to 'src/common/qca-vendor.h')
-rw-r--r--src/common/qca-vendor.h98
1 files changed, 97 insertions, 1 deletions
diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index 27ed03b..a0d6918 100644
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -6316,13 +6316,35 @@ enum qca_coex_config_profiles {
QCA_WIFI_SAP_CLASS_3_MGMT = 7,
QCA_WIFI_SAP_DATA = 8,
QCA_WIFI_SAP_ALL = 9,
+ QCA_WIFI_CASE_MAX = 31,
/* 32 - 63 corresponds to BT */
QCA_BT_A2DP = 32,
QCA_BT_BLE = 33,
QCA_BT_SCO = 34,
+ QCA_BT_CASE_MAX = 63,
/* 64 - 95 corresponds to Zigbee */
QCA_ZB_LOW = 64,
- QCA_ZB_HIGH = 65
+ QCA_ZB_HIGH = 65,
+ QCA_ZB_CASE_MAX = 95,
+ /* 0xff is default value if the u8 profile value is not set. */
+ QCA_COEX_CONFIG_PROFILE_DEFAULT_VALUE = 255
+};
+
+/**
+ * enum qca_vendor_attr_coex_config_types - Coex configurations types.
+ * This enum defines the valid set of values of coex configuration types. These
+ * values may used by attribute
+ * %QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_RESET: Reset all the
+ * weights to default values.
+ * @QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_START: Start to config
+ * weights with configurability value.
+ */
+enum qca_vendor_attr_coex_config_types {
+ QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_RESET = 1,
+ QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_START = 2,
};
/**
@@ -6354,6 +6376,80 @@ enum qca_vendor_attr_coex_config {
};
/**
+ * enum qca_vendor_attr_coex_config_three_way - Specifies vendor coex config
+ * attributes
+ * Attributes for data used by QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG
+ *
+ * QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE: u32 attribute.
+ * Indicate config type.
+ * The config types are 32-bit values from qca_vendor_attr_coex_config_types
+ *
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_1: u32 attribute.
+ * Indicate the Priority 1 profiles.
+ * The profiles are 8-bit values from enum qca_coex_config_profiles.
+ * In same priority level, maximum to 4 profiles can be set here.
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_2: u32 attribute.
+ * Indicate the Priority 2 profiles.
+ * The profiles are 8-bit values from enum qca_coex_config_profiles.
+ * In same priority level, maximum to 4 profiles can be set here.
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_3: u32 attribute.
+ * Indicate the Priority 3 profiles.
+ * The profiles are 8-bit values from enum qca_coex_config_profiles.
+ * In same priority level, maximum to 4 profiles can be set here.
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_4: u32 attribute.
+ * Indicate the Priority 4 profiles.
+ * The profiles are 8-bit values from enum qca_coex_config_profiles.
+ * In same priority level, maximum to 4 profiles can be set here.
+ * NOTE:
+ * Limitations for QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_x priority
+ * arrangement:
+ * 1: In the same u32 attribute (priority x), the profiles enum values own
+ * same priority level.
+ * 2: 0xff is default value if the u8 profile value is not set.
+ * 3: max to 4 rules/profiles in same priority level.
+ * 4: max to 4 priority level (priority 1 - priority 4)
+ * 5: one priority level only supports one scenario from WLAN/BT/ZB,
+ * hybrid rules not support.
+ * 6: if WMI_COEX_CONFIG_THREE_WAY_COEX_RESET called, priority x will
+ * remain blank to reset all parameters.
+ * For example:
+ *
+ * If the attributes as follow:
+ * priority 1:
+ * ------------------------------------
+ * | 0xff | 0 | 1 | 2 |
+ * ------------------------------------
+ * priority 2:
+ * -------------------------------------
+ * | 0xff | 0xff | 0xff | 32 |
+ * -------------------------------------
+ * priority 3:
+ * -------------------------------------
+ * | 0xff | 0xff | 0xff | 65 |
+ * -------------------------------------
+ * then it means:
+ * 1: WIFI_STA_DISCOVERY, WIFI_STA_CLASS_3_MGMT and WIFI_STA_CONNECTION
+ * owns same priority level.
+ * 2: WIFI_STA_DISCOVERY, WIFI_STA_CLASS_3_MGMT and WIFI_STA_CONNECTION
+ * has priority over BT_A2DP and ZB_HIGH.
+ * 3: BT_A2DP has priority over ZB_HIGH.
+ */
+
+enum qca_vendor_attr_coex_config_three_way {
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_INVALID = 0,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE = 1,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_1 = 2,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_2 = 3,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_3 = 4,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_4 = 5,
+
+ /* Keep last */
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_AFTER_LAST,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_MAX =
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_AFTER_LAST - 1,
+};
+
+/**
* enum qca_wlan_vendor_attr_link_properties - Represent the link properties.
*
* @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR: MAC address of the peer