aboutsummaryrefslogtreecommitdiffstats
path: root/src/ap/ap_config.h
diff options
context:
space:
mode:
authorSathishkumar Muruganandam <murugana@codeaurora.org>2018-05-07 10:27:18 (GMT)
committerJouni Malinen <j@w1.fi>2018-05-15 22:16:54 (GMT)
commitbda9c085968fa8806f6723abeeac5d9c24aae638 (patch)
tree0e19310d362fb069df10954120da1c279b118cd7 /src/ap/ap_config.h
parent16d5c9637c73a23cda4e7835d6c87845e05320c1 (diff)
downloadhostap-bda9c085968fa8806f6723abeeac5d9c24aae638.zip
hostap-bda9c085968fa8806f6723abeeac5d9c24aae638.tar.gz
hostap-bda9c085968fa8806f6723abeeac5d9c24aae638.tar.bz2
hostapd: Fix CHAN_SWITCH command for VHT20 and VHT40
Previously, hostapd CHAN_SWITCH command did not effect VHT configuration for the following: When VHT is currently disabled (ieee80211ac=0), 1. hostapd_cli -p /var/run/hostapd chan_switch 10 5180 \ sec_channel_offset=1 center_freq1=5190 bandwidth=40 ht ====> Comes up in HT40 2. hostapd_cli -p /var/run/hostapd chan_switch 10 5765 \ sec_channel_offset=-1 center_freq1=5775 bandwidth=40 vht ====> Comes up in HT40 3. hostapd_cli -p /var/run/hostapd chan_switch 10 5200 center_freq1=5200 \ bandwidth=20 vht ====> Comes up in HT20 When VHT is currently enabled (ieee80211ac=1), 1. hostapd_cli -p /var/run/hostapd chan_switch 10 5180 \ sec_channel_offset=1 center_freq1=5190 bandwidth=40 ht ====> Comes up in VHT40 2. hostapd_cli -p /var/run/hostapd chan_switch 10 5200 center_freq1=5200 \ bandwidth=20 ht ====> Comes up in VHT20 This is since VHT config from chan_switch is processed only for bandwidths 80 and above (80P80, 160) and for VHT20, VHT40 cases, only NLA chan type and chan width are updated. There is no NL attribute for determining if it is HT or VHT for bandwidths 20 & 40 and currently they are updated as HT20, HT40 (+ or - depending on offset). Same is notified back via NL80211_CMD_CH_SWITCH_NOTIFY. Instead of adding new NL attribute for tracking HT/VHT enabled config, we are adding new hostapd VHT config parameter to save the chan_switch config and use only for chan_switch case of VHT20 and VHT40. Tested with all combinations of chan_switch (noHT->20->40->80->) HT/VHT and confirmed to be working. Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Diffstat (limited to 'src/ap/ap_config.h')
-rw-r--r--src/ap/ap_config.h5
1 files changed, 5 insertions, 0 deletions
diff --git a/src/ap/ap_config.h b/src/ap/ap_config.h
index 35ccd21..bc6489a 100644
--- a/src/ap/ap_config.h
+++ b/src/ap/ap_config.h
@@ -818,6 +818,11 @@ struct hostapd_config {
struct he_phy_capabilities_info he_phy_capab;
struct he_operation he_op;
#endif /* CONFIG_IEEE80211AX */
+
+ /* VHT enable/disable config from CHAN_SWITCH */
+#define CH_SWITCH_VHT_ENABLED BIT(0)
+#define CH_SWITCH_VHT_DISABLED BIT(1)
+ unsigned int ch_switch_vht_config;
};