aboutsummaryrefslogtreecommitdiffstats
path: root/hostapd
diff options
context:
space:
mode:
authorJouni Malinen <j@w1.fi>2014-11-01 14:15:53 (GMT)
committerJouni Malinen <j@w1.fi>2014-11-01 14:15:53 (GMT)
commit01b32d5e368f284011d4cb272a3d35fd58cd612d (patch)
treec0b5bfc57c1b384a96aebeabae0ab3295700635b /hostapd
parentf21495ad38eb024f4adb6b3d786aadc1d26a4fc1 (diff)
downloadhostap-01b32d5e368f284011d4cb272a3d35fd58cd612d.zip
hostap-01b32d5e368f284011d4cb272a3d35fd58cd612d.tar.gz
hostap-01b32d5e368f284011d4cb272a3d35fd58cd612d.tar.bz2
Remove references to madwifi from various files
Number of documentation and configuration files had references to the madwifi driver interface that was removed in the previous commit. Remove these references as well. Signed-off-by: Jouni Malinen <j@w1.fi>
Diffstat (limited to 'hostapd')
-rw-r--r--hostapd/README6
-rw-r--r--hostapd/README-WPS9
-rw-r--r--hostapd/android.config6
-rw-r--r--hostapd/defconfig6
-rw-r--r--hostapd/hostapd.82
-rw-r--r--hostapd/hostapd.conf8
6 files changed, 11 insertions, 26 deletions
diff --git a/hostapd/README b/hostapd/README
index 50868ee..ea016cc 100644
--- a/hostapd/README
+++ b/hostapd/README
@@ -74,12 +74,6 @@ Current hardware/software requirements:
Please note that station firmware version needs to be 1.7.0 or newer
to work in WPA mode.
- madwifi driver for cards based on Atheros chip set (ar521x)
- (http://sourceforge.net/projects/madwifi/)
- Please note that you will need to add the correct path for
- madwifi driver root directory in .config (see defconfig file for
- an example: CFLAGS += -I<path>)
-
mac80211-based drivers that support AP mode (with driver=nl80211).
This includes drivers for Atheros (ath9k) and Broadcom (b43)
chipsets.
diff --git a/hostapd/README-WPS b/hostapd/README-WPS
index bb7d35f..d5f713a 100644
--- a/hostapd/README-WPS
+++ b/hostapd/README-WPS
@@ -58,10 +58,9 @@ hostapd configuration
WPS is an optional component that needs to be enabled in hostapd build
configuration (.config). Here is an example configuration that
-includes WPS support and uses madwifi driver interface:
+includes WPS support and uses nl80211 driver interface:
-CONFIG_DRIVER_MADWIFI=y
-CFLAGS += -I/usr/src/madwifi-0.9.3
+CONFIG_DRIVER_NL80211=y
CONFIG_WPS=y
CONFIG_WPS_UPNP=y
@@ -74,8 +73,8 @@ Following section shows an example runtime configuration
(hostapd.conf) that enables WPS:
# Configure the driver and network interface
-driver=madwifi
-interface=ath0
+driver=nl80211
+interface=wlan0
# WPA2-Personal configuration for the AP
ssid=wps-test
diff --git a/hostapd/android.config b/hostapd/android.config
index ad83308..938aa54 100644
--- a/hostapd/android.config
+++ b/hostapd/android.config
@@ -15,10 +15,6 @@
# Driver interface for wired authenticator
#CONFIG_DRIVER_WIRED=y
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
# Driver interface for drivers using the nl80211 kernel interface
#CONFIG_DRIVER_NL80211=y
# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
@@ -132,7 +128,7 @@ CONFIG_IPV6=y
#CONFIG_IEEE80211R=y
# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
#CONFIG_DRIVER_RADIUS_ACL=y
# IEEE 802.11n (High Throughput) support
diff --git a/hostapd/defconfig b/hostapd/defconfig
index 5b74b64..8f8a53f 100644
--- a/hostapd/defconfig
+++ b/hostapd/defconfig
@@ -15,10 +15,6 @@ CONFIG_DRIVER_HOSTAP=y
# Driver interface for wired authenticator
#CONFIG_DRIVER_WIRED=y
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
# Driver interface for drivers using the nl80211 kernel interface
CONFIG_DRIVER_NL80211=y
@@ -142,7 +138,7 @@ CONFIG_IPV6=y
#CONFIG_IEEE80211R=y
# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
#CONFIG_DRIVER_RADIUS_ACL=y
# IEEE 802.11n (High Throughput) support
diff --git a/hostapd/hostapd.8 b/hostapd/hostapd.8
index b4456bb..d19d862 100644
--- a/hostapd/hostapd.8
+++ b/hostapd/hostapd.8
@@ -12,7 +12,7 @@ daemon.
.B hostapd
is a user space daemon for access point and authentication servers.
It implements IEEE 802.11 access point management, IEEE 802.1X/WPA/WPA2/EAP Authenticators and RADIUS authentication server.
-The current version supports Linux (Host AP, madwifi, mac80211-based drivers) and FreeBSD (net80211).
+The current version supports Linux (Host AP, mac80211-based drivers) and FreeBSD (net80211).
.B hostapd
is designed to be a "daemon" program that runs in the background and acts as the backend component controlling authentication.
diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index eaff3dd..95d6af9 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -2,10 +2,10 @@
# Empty lines and lines starting with # are ignored
# AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for
-# management frames); ath0 for madwifi
+# management frames with the Host AP driver); wlan0 with many nl80211 drivers
interface=wlan0
-# In case of madwifi, atheros, and nl80211 driver interfaces, an additional
+# In case of atheros and nl80211 driver interfaces, an additional
# configuration parameter, bridge, may be used to notify hostapd if the
# interface is included in a bridge. This parameter is not used with Host AP
# driver. If the bridge parameter is not set, the drivers will automatically
@@ -18,7 +18,7 @@ interface=wlan0
# interface is also created.
#bridge=br0
-# Driver interface type (hostap/wired/madwifi/test/none/nl80211/bsd);
+# Driver interface type (hostap/wired/test/none/nl80211/bsd);
# default: hostap). nl80211 is used with all Linux mac80211 drivers.
# Use driver=none if building hostapd as a standalone RADIUS server that does
# not control any wireless/wired driver.
@@ -221,7 +221,7 @@ fragm_threshold=2346
# Station MAC address -based authentication
# Please note that this kind of access control requires a driver that uses
# hostapd to take care of management frame processing and as such, this can be
-# used with driver=hostap or driver=nl80211, but not with driver=madwifi.
+# used with driver=hostap or driver=nl80211, but not with driver=atheros.
# 0 = accept unless in deny list
# 1 = deny unless in accept list
# 2 = use external RADIUS server (accept/deny lists are searched first)