aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAlexei Avshalom Lazar <ailizaro@codeaurora.org>2019-09-11 09:03:07 (GMT)
committerJouni Malinen <j@w1.fi>2019-10-07 14:20:41 (GMT)
commita82aee1f4035bed9ceabae0108f7b0350b8482c9 (patch)
tree8fc30ecc9f3e88af9d63cc80cf3f6f5e3de0d6f6
parent35aed771f9a503aa3284aafdf97dcdda50628dda (diff)
downloadhostap-a82aee1f4035bed9ceabae0108f7b0350b8482c9.zip
hostap-a82aee1f4035bed9ceabae0108f7b0350b8482c9.tar.gz
hostap-a82aee1f4035bed9ceabae0108f7b0350b8482c9.tar.bz2
wpa_supplicant: Add support for EDMG channels
As part of a connection request, set EDMG parameters for the driver to use in the association. The EDMG parameters are based on EDMG IE received from the AP's Probe Response frames, the driver's EDMG capability, and the EDMG configuration from the configuration. As part of starting an AP, set EDMG parameters for the driver to use for AP operation. The EDMG parameters are based on the driver's EDMG capability and the EDMG configuration from the configuration. This implementation is limited to CB2 (channel bonding of 2 channels) and the bonded channels must be adjacent, i.e., the supported values for edmg_channel are 9..13. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
-rw-r--r--wpa_supplicant/wpa_supplicant.c177
1 files changed, 177 insertions, 0 deletions
diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c
index 1c663ea..94cc8c7 100644
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -3023,6 +3023,117 @@ static void wpas_update_fils_connect_params(struct wpa_supplicant *wpa_s)
#endif /* CONFIG_FILS && IEEE8021X_EAPOL */
+static u8 wpa_ie_get_edmg_oper_chans(const u8 *edmg_ie)
+{
+ if (!edmg_ie || edmg_ie[1] < 6)
+ return 0;
+ return edmg_ie[EDMG_BSS_OPERATING_CHANNELS_OFFSET];
+}
+
+
+static u8 wpa_ie_get_edmg_oper_chan_width(const u8 *edmg_ie)
+{
+ if (!edmg_ie || edmg_ie[1] < 6)
+ return 0;
+ return edmg_ie[EDMG_OPERATING_CHANNEL_WIDTH_OFFSET];
+}
+
+
+/* Returns the intersection of two EDMG configurations.
+ * Note: The current implementation is limited to CB2 only (CB1 included),
+ * i.e., the implementation supports up to 2 contiguous channels.
+ * For supporting non-contiguous (aggregated) channels and for supporting
+ * CB3 and above, this function will need to be extended.
+ */
+static struct ieee80211_edmg_config
+get_edmg_intersection(struct ieee80211_edmg_config a,
+ struct ieee80211_edmg_config b,
+ u8 primary_channel)
+{
+ struct ieee80211_edmg_config result;
+ int i, contiguous = 0;
+ int max_contiguous = 0;
+
+ result.channels = b.channels & a.channels;
+ if (!result.channels) {
+ wpa_printf(MSG_DEBUG,
+ "EDMG not possible: cannot intersect channels 0x%x and 0x%x",
+ a.channels, b.channels);
+ goto fail;
+ }
+
+ if (!(result.channels & BIT(primary_channel - 1))) {
+ wpa_printf(MSG_DEBUG,
+ "EDMG not possible: the primary channel %d is not one of the intersected channels 0x%x",
+ primary_channel, result.channels);
+ goto fail;
+ }
+
+ /* Find max contiguous channels */
+ for (i = 0; i < 6; i++) {
+ if (result.channels & BIT(i))
+ contiguous++;
+ else
+ contiguous = 0;
+
+ if (contiguous > max_contiguous)
+ max_contiguous = contiguous;
+ }
+
+ /* Assuming AP and STA supports ONLY contiguous channels,
+ * bw configuration can have value between 4-7.
+ */
+ if ((b.bw_config < a.bw_config))
+ result.bw_config = b.bw_config;
+ else
+ result.bw_config = a.bw_config;
+
+ if ((max_contiguous >= 2 && result.bw_config < EDMG_BW_CONFIG_5) ||
+ (max_contiguous >= 1 && result.bw_config < EDMG_BW_CONFIG_4)) {
+ wpa_printf(MSG_DEBUG,
+ "EDMG not possible: not enough contiguous channels %d for supporting CB1 or CB2",
+ max_contiguous);
+ goto fail;
+ }
+
+ return result;
+
+fail:
+ result.channels = 0;
+ result.bw_config = 0;
+ return result;
+}
+
+
+static struct ieee80211_edmg_config
+get_supported_edmg(struct wpa_supplicant *wpa_s,
+ struct hostapd_freq_params *freq,
+ struct ieee80211_edmg_config request_edmg)
+{
+ enum hostapd_hw_mode hw_mode;
+ struct hostapd_hw_modes *mode = NULL;
+ u8 primary_channel;
+
+ if (!wpa_s->hw.modes)
+ goto fail;
+
+ hw_mode = ieee80211_freq_to_chan(freq->freq, &primary_channel);
+ if (hw_mode == NUM_HOSTAPD_MODES)
+ goto fail;
+
+ mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, hw_mode);
+ if (!mode)
+ goto fail;
+
+ return get_edmg_intersection(mode->edmg, request_edmg, primary_channel);
+
+fail:
+ request_edmg.channels = 0;
+ request_edmg.bw_config = 0;
+ return request_edmg;
+}
+
+
#ifdef CONFIG_MBO
void wpas_update_mbo_connect_params(struct wpa_supplicant *wpa_s)
{
@@ -3058,6 +3169,7 @@ static void wpas_start_assoc_cb(struct wpa_radio_work *work, int deinit)
struct wpa_ssid *ssid = cwork->ssid;
struct wpa_supplicant *wpa_s = work->wpa_s;
u8 *wpa_ie;
+ const u8 *edmg_ie_oper;
int use_crypt, ret, i, bssid_changed;
unsigned int cipher_pairwise, cipher_group, cipher_group_mgmt;
struct wpa_driver_associate_params params;
@@ -3241,6 +3353,71 @@ static void wpas_start_assoc_cb(struct wpa_radio_work *work, int deinit)
params.beacon_int = wpa_s->conf->beacon_int;
}
+ if (bss && ssid->enable_edmg)
+ edmg_ie_oper = get_ie_ext((const u8 *) (bss + 1), bss->ie_len,
+ WLAN_EID_EXT_EDMG_OPERATION);
+ else
+ edmg_ie_oper = NULL;
+
+ if (edmg_ie_oper) {
+ params.freq.edmg.channels =
+ wpa_ie_get_edmg_oper_chans(edmg_ie_oper);
+ params.freq.edmg.bw_config =
+ wpa_ie_get_edmg_oper_chan_width(edmg_ie_oper);
+ wpa_printf(MSG_DEBUG,
+ "AP supports EDMG channels 0x%x, bw_config %d",
+ params.freq.edmg.channels,
+ params.freq.edmg.bw_config);
+
+ /* User may ask for specific EDMG channel for EDMG connection
+ * (must be supported by AP)
+ */
+ if (ssid->edmg_channel) {
+ struct ieee80211_edmg_config configured_edmg;
+ enum hostapd_hw_mode hw_mode;
+ u8 primary_channel;
+
+ hw_mode = ieee80211_freq_to_chan(bss->freq,
+ &primary_channel);
+ if (hw_mode == NUM_HOSTAPD_MODES)
+ goto edmg_fail;
+
+ hostapd_encode_edmg_chan(ssid->enable_edmg,
+ ssid->edmg_channel,
+ primary_channel,
+ &configured_edmg);
+
+ if (ieee802_edmg_is_allowed(params.freq.edmg,
+ configured_edmg)) {
+ params.freq.edmg = configured_edmg;
+ wpa_printf(MSG_DEBUG,
+ "Use EDMG channel %d for connection",
+ ssid->edmg_channel);
+ } else {
+ edmg_fail:
+ params.freq.edmg.channels = 0;
+ params.freq.edmg.bw_config = 0;
+ wpa_printf(MSG_WARNING,
+ "EDMG channel %d not supported by AP, fallback to DMG",
+ ssid->edmg_channel);
+ }
+ }
+
+ if (params.freq.edmg.channels) {
+ wpa_printf(MSG_DEBUG,
+ "EDMG before: channels 0x%x, bw_config %d",
+ params.freq.edmg.channels,
+ params.freq.edmg.bw_config);
+ params.freq.edmg = get_supported_edmg(wpa_s,
+ &params.freq,
+ params.freq.edmg);
+ wpa_printf(MSG_DEBUG,
+ "EDMG after: channels 0x%x, bw_config %d",
+ params.freq.edmg.channels,
+ params.freq.edmg.bw_config);
+ }
+ }
+
params.pairwise_suite = cipher_pairwise;
params.group_suite = cipher_group;
params.mgmt_group_suite = cipher_group_mgmt;