aboutsummaryrefslogtreecommitdiffstats
path: root/hostapd/driver_nl80211.c
Commit message (Expand)AuthorAgeFilesLines
* Verify that driver supports configured HT capabilitiesJouni Malinen2009-02-081-0/+5
* driver_nl80211: Fixed inactivity poll status processingJouni Malinen2009-02-081-2/+3
* driver_nl80211: use Linux socket filter to improve performanceJohannes Berg2009-02-081-0/+151
* Removed dead codeJouni Malinen2009-02-081-2/+0
* Fixed copy-paste error in retry configuration (incorrect ioctl used)Jouni Malinen2009-02-081-2/+2
* Include pending MFP defines in nl80211_copy.hJouni Malinen2008-12-311-6/+0
* Renamed nl80211 HT channel parameters to match with kernelJouni Malinen2008-12-311-6/+6
* MFP: Remove mac80211 workaround of IGTK in monitor netdevJouni Malinen2008-12-311-5/+0
* Added libnl 2.0 compatibility code (CONFIG_LIBNL20=y in .config needed)Jouni Malinen2008-12-081-0/+13
* nl80211: Include copy of linux/nl80211.h with hostapd/wpa_supplicantJouni Malinen2008-12-081-38/+2
* nl80211: Remove the debug print from data frame processingJouni Malinen2008-12-041-1/+0
* Fixed WEP authentication (both Open System and Shared Key) with mac80211Jouni Malinen2008-12-041-1/+23
* nl80211: Generate 802.11b mode based on 802.11g informationJouni Malinen2008-12-031-1/+75
* Changed NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET to use U32Jouni Malinen2008-11-261-6/+6
* nl80211: Fixed a merge issue in an earlier commit for set_freqJouni Malinen2008-11-261-13/+15
* nl80211: Clear HT flags from the channel when exitingJouni Malinen2008-11-261-0/+14
* Added option to distinguish non-HT and HT20 in set_freqJouni Malinen2008-11-261-0/+4
* nl80211: Add support for setting channel frequency and HT20 vs. HT40Jouni Malinen2008-11-251-3/+33
* driver_nl80211: Added set_country() handlerJouni Malinen2008-11-251-0/+25
* Get maximum TX power for each allowed channel from mac80211Jouni Malinen2008-11-251-0/+11
* driver_nl80211: Remove monitor interface if AP initialization failsJouni Malinen2008-11-181-5/+9
* Changed channel flags configuration to read the information from the driverJouni Malinen2008-11-181-15/+10
* driver_nl80211: Remove set_ssid from nl80211 driverJohannes Berg2008-11-011-23/+0
* driver_nl80211: Added TX queue parameter configurationJouni Malinen2008-10-291-0/+41
* driver_nl80211: Added basic rate configurationJouni Malinen2008-10-291-0/+27
* nl80211: Finish dumps properly (ported from iw.git)Jouni Malinen2008-10-291-1/+3
* nl80211 hostapd driver: clean up netlink codeJohannes Berg2008-09-291-282/+139
* nl80211 driver: correctly set the encrypt bit for eapol framesJohannes Berg2008-09-291-4/+12
* Cleaned up TX callback request processingJouni Malinen2008-08-311-6/+0
* Send HT parameters for new STAsJouni Malinen2008-08-251-0/+10
* Switched driver_nl80211 to use the new sta_add2()Jouni Malinen2008-08-251-9/+9
* Added support for setting BSS parameters with NL80211_CMD_SET_BSSJouni Malinen2008-08-071-3/+45
* Add IGTK/MFP configuration (disabled by default)Jouni Malinen2008-06-181-6/+38
* Added support for configuring IGTKJouni Malinen2008-06-161-1/+6
* Fixed a buffer overflow in nla_parse callJouni Malinen2008-06-061-1/+1
* Include wireless_copy.h instead of linux/wireless.h to avoid conflictsJouni Malinen2008-06-031-1/+1
* Small whitespace cleanupJouni Malinen2008-04-131-5/+5
* driver_nl80211: Do not send nl80211 message if beacon is not set yetMichael Bernhard2008-04-131-0/+3
* driver_nl80211: Return correct valueMichael Bernhard2008-04-131-2/+2
* driver_nl80211: Initialize local variableMichael Bernhard2008-04-131-1/+1
* driver_nl80211: Clone netlink callbacks instead of creating new onesMichael Bernhard2008-04-131-3/+3
* driver_nl80211: Use customizable netlink callbacksBernhard Michael2008-04-131-1/+9
* driver_nl80211: Use the correct nl80211 command to flush all stationsMichael Bernhard2008-04-131-1/+1
* nl80211 driver: fix beacon interval settingJohannes Berg2008-04-091-2/+4
* Fix nl80211 driver to receive EAPOL responseArtem Antonov2008-04-081-0/+5
* Rename NL80211_[ATTR]_STA_STAT_* to NL80211_[ATTR_]STA_INFO_Daniel Wagner2008-03-311-14/+14
* Added listen interval to hostapd sta_add() driver functionJouni Malinen2008-02-281-2/+2
* Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 releaseJouni Malinen2008-02-281-0/+2382