path: root/hostapd/defconfig
Commit message (Collapse)AuthorAgeFilesLines
* Use better examples for MadWifi path in defconfig, clarify commentsPavel Roskin2009-02-081-1/+1
| | | | | | | | | MadWifi is unlikely to be in ../head relative to hostapd or wpa_supplicant, as it would be inside the hostap git repository. MadWifi sources are more likely to be in a directory called "madwifi" and residing outside the hostap repository. Using "madwifi" also demonstrates that the top-level madwifi directory is needed. (cherry picked from commit e7e9c46e55b4ee3cdbbdd91900220e4f24ceb67c)
* Added notes about WPS UPnP support and external RegistrarsJouni Malinen2009-02-081-0/+2
| | | | (cherry picked from commit c5e1522f9a2cf1e061c1204bfe16323395045276)
* Added CONFIG_NO_STDOUT_DEBUG for hostapdJouni Malinen2009-02-081-0/+5
| | | | | | This is similar to one in wpa_supplicant and can be used to reduce the binary size by removing debugging messages. (cherry picked from commit 03018d3e7c2613294103e2a9ca9b92c69192ce70)
* Added CONFIG_IEEE80211N into defconfig (commented out)Jouni Malinen2008-12-091-0/+3
* Updated the comment about libnl to state that version 1.1 is new enoughJouni Malinen2008-12-091-2/+3
* Merged EAP-AKA' into eap_aka.c and added it to defconfig/ChangeLogJouni Malinen2008-12-071-0/+4
* Added preliminary Wi-Fi Protected Setup (WPS) implementationJouni Malinen2008-11-231-0/+3
| | | | | | | | | | | | | This adds WPS support for both hostapd and wpa_supplicant. Both programs can be configured to act as WPS Enrollee and Registrar. Both PBC and PIN methods are supported. Currently, hostapd has more complete configuration option for WPS parameters and wpa_supplicant configuration style will likely change in the future. External Registrars are not yet supported in hostapd or wpa_supplicant. While wpa_supplicant has initial support for acting as an Registrar to configure an AP, this is still using number of hardcoded parameters which will need to be made configurable for proper operation.
* Added a new driver wrapper, "none", for RADIUS server only configurationJouni Malinen2008-10-011-0/+3
| | | | | This can be used to limit hostapd code size and clean up debug output for configurations that do not use hostapd to control AP functionality.
* IEEE Std 802.11r-2008 has been released, so update referencesJouni Malinen2008-08-151-4/+1
* Support for RADIUS ACLs with drivers that do not use hostapd MLMEChris Zimmermann2008-03-121-0/+4
| | | | | | | | | | | | | | | | | | Sam Leffler <sam@errno.com>: Attached are changes from Chris Zimmerman (cc'd) to allow drivers to handle radius ACL's. The patch is against 0.5.10 but I suspect will also apply to your latest code. These mods enable radius acl support in freebsd w/ my vap code. You may want to do the changes to ieee802_11_auth.c differently as they currently require all participating drivers to work the same. You might be able to check the return value from hostapd_set_radius_acl_auth and use that to decide whether the alternate code should be run so you can have 1 driver using this stuff while the other does not. (jm: Added without more dynamic check for now; in addition, none of the current in-tree driver wrappers actually implement these handlers, so this is in preparation for future changes)
* TNC: Added TNC server support into documentation and ChangeLogsJouni Malinen2008-03-091-0/+3
* Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 releaseJouni Malinen2008-02-281-0/+119